{"title":"Maneater HDPE Molds","description":"","products":[{"product_id":"gator-mold-3-25-stopper-blanks","title":"Gator Mold - 2.5\" x 1.5\" x 1.5\" Stopper Mold","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR THE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 4\" x 2.25\" x 2\" with one casting chambers, each measuring 2.5\" x 1.5\" x 1.5\".  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  \u003cspan\u003eThe blanks can easily be end trimmed and squared up on a table saw, if so desired. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864231448809,"sku":"GM-Stopper-2.5_flat","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/C8A0769F-212E-4FEF-803E-6BF3807B3AE2_1_105_c.jpg?v=1733254427"},{"product_id":"gator-mold-4-50-knife-scales","title":"Gator Mold - 4.50\" Knife Scales","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 6.50\" x 4.50\" x .1.25\" with two casting chambers, each measuring 4.50\" x 1.50\" x .50\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eImportant Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864231612649,"sku":"GM-Knife-4.50","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/Knife4.5-top.png?v=1650380110"},{"product_id":"gator-mold-5-5-knife-scales","title":"Gator Mold - 5.5\" Knife Scales","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 6.50\" x 4.50\" x .75\" with two casting chambers, each measuring 5.5\" x 1.50\" x .50\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eImportant Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864231678185,"sku":"GM-Knife-5.50","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/Knife5.5-top.png?v=1650380125"},{"product_id":"gator-mold-replacement-black-mushroom-plugs","title":"Gator Mold Replacement Black Mushroom Plugs for HDPE Casting Molds","description":"\u003ch2\u003eGator Mold Replacement Black Mushroom Plugs\u003c\/h2\u003e\n\u003cp\u003eKeep your Maneater HDPE casting molds performing at their best with these replacement black mushroom plugs. Designed specifically as direct replacements, the plugs restore proper sealing and alignment in your molds.\u003c\/p\u003e\n\u003ch3\u003eLarge Plugs\u003c\/h3\u003e\n\u003cp\u003eLarge plugs are ideal for the corners of most molds and the center positions in larger formats such as Gator block molds. Their robust construction ensures consistent pressure distribution during resin pours.\u003c\/p\u003e\n\u003ch3\u003eSmall Plugs\u003c\/h3\u003e\n\u003cp\u003eSmall plugs fit the slot positions in Dinobone molds and the corners of compact molds including Dogbone and Dual Socket Ring styles. They provide precise fitment for detailed pen blank casting.\u003c\/p\u003e\n\u003cp\u003eThese silicone plugs offer excellent chemical resistance and repeated-use durability. Pair them with your existing Maneater molds for reliable results every time.\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Large \/ Singles","offer_id":42960594764009,"sku":"RubberPlugs-Large","price":0.75,"currency_code":"USD","in_stock":true},{"title":"Large \/ 4-pack","offer_id":49343065751785,"sku":null,"price":2.45,"currency_code":"USD","in_stock":true},{"title":"Large \/ 8-pack","offer_id":50007198531817,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Small \/ Singles","offer_id":42960594796777,"sku":"RubberPlugs-Small","price":0.75,"currency_code":"USD","in_stock":true},{"title":"Small \/ 4-pack","offer_id":49343065784553,"sku":null,"price":2.45,"currency_code":"USD","in_stock":true},{"title":"Small \/ 8-pack","offer_id":50007198564585,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/BlackPlugs.png?v=1650344604"},{"product_id":"dinobone-mini-combo-casting-system-replacement-inserts-full-set","title":"\"DinoBone - Mini Combo Casting System\" Replacement Inserts (Full Set)","description":"\u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSet of 6 silicone inserts for the \"DINOBONE - MINI COMBO CASTING SYSTEM\".  These inserts fit chambers measuring 4.50\" x .75\" x 1.0\".\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cspan\u003eThe stoppers will accommodate tubes 7mm - 27\/64\" in diameter.  \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864231874793,"sku":"DinoMiniInserts-FullSet","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoMiniPlugs.png?v=1650379248"},{"product_id":"maneater-silicone-mold-release","title":"Maneater Silicone Mold Release","description":"\u003ch3\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e5 oz of superb silicone mold release \u003cspan\u003ethat is intended to be applied via brush\u003c\/span\u003e.  The release agent works great with all Maneater molds, especially for epoxy resins which can be difficult to demold.\u003c\/span\u003e\u003c\/h3\u003e","brand":"Maneater","offers":[{"title":"5 oz Brush Top Can","offer_id":47780699341033,"sku":"MoldReleseSilicone-5oz","price":10.95,"currency_code":"USD","in_stock":true},{"title":"32 oz Qt Can","offer_id":47780699373801,"sku":"MoldReleseSilicone-32oz","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/image.heic?v=1656531330"},{"product_id":"maneater-wax-mold-release","title":"Maneater Wax Mold Release","description":"\u003ch3\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e4 oz of superb wax based mold release that is intended to be applied via brush.  The release agent works great with all Maneater molds, especially for when casting with silicone inserts.\u003c\/span\u003e\u003c\/h3\u003e","brand":"Maneater","offers":[{"title":"4oz","offer_id":50621754507497,"sku":null,"price":9.95,"currency_code":"USD","in_stock":true},{"title":"32oz qt can","offer_id":50621754540265,"sku":null,"price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/image_fc33d04d-6d7c-4695-8444-d5099f60935a.heic?v=1656532471"},{"product_id":"dogbone-tube-in-casting-mold-white","title":"Dogbone - Tube-In Casting Mold (White)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIf you enjoy clear casting labels, watch parts, skins, hybrids, etc. and are looking for a semi-permanent solution for tube-in casting, then the new Maneater Crafts “DogBone” tube-in casting mold is for you! It’s a single mold solution that is super simple to use and will work with the majority of turning kits on the market (not to exceed tubes over 12.5mm in diameter). It’s literally a one mold fits all solution!! That includes most pen kits, seam rippers, razors and even darts!\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eWhat makes the DogBone so special? To start, it is milled from solid HDPE and is virtually indestructible. It won’t warp or crack like silicone molds. It features two 5.5” x .75” chambers and two sets of silicone inserts. One set has small stoppers for 7mm - 3\/8” tubes. The other set has stoppers for 3\/8” - 12.5mm tubes. The inserts are replaceable at a cost of $8 per set. The mold body should last for years if properly cared for.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eWhat else is special about the DogBone? Well, the unique design allows the molds to stack one on top of the other. They will self-align with the included rubber feet and if pressure casting in a 2.5 gal pot, you can stack them up to six molds high and two stacks side by side. That gives you the ability to cast up to 24 blanks at a time!! And best of all, no mold caddy it needed!! That makes this mold ideal for hobby casters and volume casters alike!\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe DogBone is strictly intended for tube-in casting since the chambers don’t include bottom plugs to assist with blank removal. If you are interested in casting full chamber blanks then please try one of the other Maneater molds. All of the usual casting resins will work great, including Royal Palm, Alumilite and PR (polyester resin). \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232038633,"sku":"DogBone - White","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DogBone2-Combo-1.png?v=1650379870"},{"product_id":"dogbone-replacement-inserts-full-set","title":"Dogbone Replacement Inserts (Full Set)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eTWO Sets of FOUR silicone inserts for the \"Dog Bone - Tube-In Casting Mold\".  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cspan\u003eOne set of FOUR small stoppers for 7mm - 10mm tubes. The other set has FOUR large stoppers for 3\/8” - 12.5mm tubes.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232104169,"sku":"DogBoneInserts-FullSet","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DogPlug-FullSet.png?v=1650379236"},{"product_id":"gator-mold-5-25-block-mold","title":"Gator Mold - 5.25\" Block Mold","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 7.3125\" x 6.70\" x 2.00\" with one casting chamber measuring 5.25\" x 5.00\" x 1.21875\".  Up to five pen blanks can be cut from the block and they can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232235241,"sku":"BM-5.25","price":57.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/GatorBlock-top.png?v=1650380092"},{"product_id":"gator-ring-mold-two-chamber","title":"Gator Ring Mold - Two Chamber","description":"\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack.  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out. These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003eThis model has overall dimensions of 3.5\" x 1.75\" x 1.25\" with two casting chambers, each measuring 1.25\" round x .625\" deep.  The blanks can easily be end trimmed and squared up on a table saw or bandsaw, if so desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232300777,"sku":"GatorRing-2","price":8.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/IMG_0340.jpg?v=1667912637"},{"product_id":"round-stopper-mold-4-chamber","title":"Turkey Pot Mold - 4 Chamber","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out. These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 9.5\" square x 2.25\" with rounded corners and each of the four casting chambers measuring \u003cmeta charset=\"utf-8\"\u003e4\" round x 1.5\" deep.  There is a single bonus short stopper mold in the center measuring 1.5\" round x 1.625\" deep. The blanks can easily be end trimmed on a table saw, if so desired.\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Silicone or Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232497385,"sku":"","price":154.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/F9100C63-7298-439A-947A-419B90F17AC8_1_105_c.jpg?v=1733254386"},{"product_id":"dinobone-2-combo-casting-system-5-25-pen-blanks","title":"DinoBone 2 - Combo Casting System - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold system has overall dimensions of 7.25\" x 3.75\" x 1.60\" with two casting chambers, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIncludes four large stopper silicone inserts and four small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27\/64\" in diameter.  The large stoppers will accommodate tubes 27\/64\" - 13.2mm. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232562921,"sku":"DinoBone 2 - CCS","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBone2-Combo-1.png?v=1650379392"},{"product_id":"dinobone-combo-casting-system-replacement-inserts-large-pair","title":"DinoBone - Combo Casting System - Inserts (Large Pair)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSet of 2 silicone inserts for the DINOBONE - COMBO CASTING SYSTEM.  These inserts fit chambers measuring 5.25\" x .84375\" x 1.0\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe large stoppers will accommodate tubes 27\/64\" - 13.2mm in diameter. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232759529,"sku":"5.25 Inserts - Large Pair","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoPlugPair-Large.png?v=1650379281"},{"product_id":"dinobone-combo-casting-system-replacement-inserts-small-pair","title":"DinoBone - Combo Casting System - Inserts (Small Pair)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSet of 2 silicone inserts for the \"DINOBONE - COMBO CASTING SYSTEM\".  These inserts fit chambers measuring 5.25\" x .84375\" x 1.0\".\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe small stoppers will accommodate tubes 7mm - 27\/64\" in diameter. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232792297,"sku":"5.25 Inserts - Small Pair","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoPlugPair-Small.png?v=1650379269"},{"product_id":"dinobone-3-combo-casting-system-5-25-pen-blanks","title":"DinoBone 3 - Combo Casting System - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold system has overall dimensions of 7.25\" x 5.25\" x 1.60\" with three casting chambers, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIncludes six large stopper silicone inserts and six small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27\/64\" in diameter.  The large stoppers will accommodate tubes 27\/64\" - 13.2mm. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232857833,"sku":"DinoBone 3 - CCS","price":68.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBone3-Combo-1.png?v=1650379632"},{"product_id":"dinobone-4-combo-casting-system-5-25-pen-blanks","title":"DinoBone 4 - Combo Casting System - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold system has overall dimensions of 7.25\" x 6.75\" x 1.60\" with four casting chambers, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIncludes eight large stopper silicone inserts and eight small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27\/64\" in diameter.  The large stoppers will accommodate tubes 27\/64\" - 13.2mm. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232956137,"sku":"DinoBone 4 - CCS","price":87.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBone4-Combo-1.png?v=1650379667"},{"product_id":"dinobone-mini-combo-casting-system-4-50-pen-blanks","title":"DinoBone Mini - Combo Casting System - 4.50\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold system has overall dimensions of 6.25\" x 4.875\" x 1.60\" with three casting chambers, each measuring 4.5\" x .75\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIncludes six small stopper silicone inserts!  The stoppers will accommodate tubes 7mm - 27\/64\" in diameter.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864232988905,"sku":"DinoBone Mini - CCS","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBoneMini3-Combo-1.png?v=1650379604"},{"product_id":"dinobone-mini-mold-body-4-50-pen-blanks","title":"DinoBone Mini - Mold Body - 4.50\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold body has overall dimensions of 6.25\" x 4.875\" x 1.60\" with three casting chambers, each measuring 4.5\" x .75\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864233054441,"sku":"DinoBone Mini - MB","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBoneMini3-top.png?v=1650379591"},{"product_id":"dinobone-2-mold-body-5-25-pen-blanks","title":"DinoBone 2 - Mold Body - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold body has overall dimensions of 7.25\" x 3.75\" x 1.60\" with two casting chambers, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864233119977,"sku":"DinoBone 2 - MB","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBone2-top.png?v=1650379426"},{"product_id":"dinobone-3-mold-body-5-25-pen-blanks","title":"DinoBone 3 - Mold Body - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold body has overall dimensions of 7.25\" x 5.25\" x 1.60\" with three casting chambers, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cspan style=\"font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 10px;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864233152745,"sku":"DinoBone 3 - MB","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBone3-top.png?v=1650379653"},{"product_id":"dinobone-4-mold-body-5-25-pen-blanks","title":"DinoBone 4 - Mold Body - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold body has overall dimensions of 7.25\" x 6.75\" x 1.60\" with four casting chambers, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42864233218281,"sku":"DinoBone 4 - MB","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBone4-top.png?v=1650379681"},{"product_id":"dinobone-mini-combo-casting-system-replacement-inserts-single-pair","title":"\"DinoBone - Mini Combo Casting System\" Replacement Inserts (Single Pair)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSingle Pair of silicone inserts for the \"DINOBONE - MINI COMBO CASTING SYSTEM\".  These inserts fit chambers measuring 4.50\" x .75\" x 1.0\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cspan\u003eThe stoppers will accommodate tubes 7mm - 27\/64\" in diameter.  \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42977243267305,"sku":"DinoMiniInserts-Pair","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoMiniPlugs_8e742bc4-81e0-4476-af56-a4630e0bc2d3.png?v=1650627967"},{"product_id":"dogbone-replacement-inserts-small-pair","title":"Dogbone Replacement Inserts (Small Set)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSet of four SMALL Silicone inserts for the \"Dog Bone - Tube-In Casting Mold\".  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cspan\u003eTwo pairs of small stoppers for 7mm - 10mm tubes.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42984467202281,"sku":"DogBoneInserts-SmallSet","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DogPlug-Small.png?v=1651023722"},{"product_id":"dogbone-replacement-inserts-large-set","title":"Dogbone Replacement Inserts (Large Set)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSet of \u003cstrong\u003eFOUR\u003c\/strong\u003e \u003cstrong\u003eLARGE\u003c\/strong\u003e silicone inserts for the \"DogBone - Tube-In Casting Mold\".  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cspan\u003eOne set if silicon inserts for 3\/8” - 12.5mm tubes.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":42984473493737,"sku":"DogBoneInserts-LargeSet","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DogPlug-Large.png?v=1651023606"},{"product_id":"copy-of-gator-ring-mold-fourteen-chamber","title":"Gator Ring Mold - Fourteen Chamber","description":"\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eI\u003c\/span\u003entroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack.  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out. These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION! \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003eThis model has overall dimensions of \u003cmeta charset=\"utf-8\"\u003e7.25\" x 6.75\" x 1.25\" with fourteen\u003cspan data-mce-fragment=\"1\"\u003e casting chambers, each measuring 1.25\" round x .625\" deep.\u003c\/span\u003e  The blanks can easily be end trimmed and squared up on a table saw, if so desired. These ring molds are compatible for stacking directly with our 4 slot and 5\" block molds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: arial, helvetica, sans-serif;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":43918347796713,"sku":"GatorRing-14","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/IMG_0343.jpg?v=1667913284"},{"product_id":"pvc-pipe-plugs-for-vertical-resin-casting","title":"PVC Pipe Plugs for Vertical Resin Casting","description":"","brand":"Maneater","offers":[{"title":"3\/4” PVC Sch40","offer_id":50891406835945,"sku":"PVCPlug-1","price":2.0,"currency_code":"USD","in_stock":true},{"title":"1\" PVC Sch40","offer_id":44548673634537,"sku":"PVCPlug-1","price":2.55,"currency_code":"USD","in_stock":true},{"title":"1-1\/2\" PVC Sch40","offer_id":44548673667305,"sku":"PVCPlug-1-5","price":3.75,"currency_code":"USD","in_stock":true},{"title":"2\" PVC Sch40","offer_id":44548673700073,"sku":"PVCPlug-2","price":5.25,"currency_code":"USD","in_stock":true},{"title":"3\" PVC Sch40","offer_id":44548673732841,"sku":"PVCPlug-3","price":11.0,"currency_code":"USD","in_stock":true},{"title":"4\" PVC Sch40","offer_id":44548673765609,"sku":"PVCPlug-4","price":17.0,"currency_code":"USD","in_stock":true}]},{"product_id":"gator-mold-6-x-2-x-1-knife-scales","title":"Gator Mold - 6?x 2? x 1? Knife Scales","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eImportant Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":44884693123305,"sku":null,"price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/FullSizeRender.jpg?v=1717264769"},{"product_id":"gator-mold-6-block","title":"Gator Mold - 6\" x 6\" x 1\" Block Mold","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis model has overall dimensions of 7.3125\" x 6.70\" x 2.00\" with one casting chamber measuring 6\" x 6\" x 1\".  Up to SIX pen blanks can be cut from the block and they can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":45344826523881,"sku":"BM-661","price":78.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/GatorBlock-top_5563b5c3-db27-4cab-ba88-25c4449f71d4.png?v=1692018740"},{"product_id":"dinobone-combo-casting-system-replacement-inserts-short-blank-casting","title":"DinoBone - Combo Casting System - Inserts (Short Blank Casting)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eSet of 2 silicone inserts for the \"DINOBONE - COMBO CASTING SYSTEM\".  These inserts fit chambers measuring 5.25\" x .84375\" x 1.0\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThese blocks are designed to all for casting shorter than the full length blanks. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":45796971184361,"sku":"5.25 Inserts - Blocks","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinobonePlugs.png?v=1697567411"},{"product_id":"gatorbone-4","title":"GatorBone 4 - Mold Body - 1\" x 1\" x 6\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold body has overall dimensions of 8.25\" x 7.25\" x 1.60\" with four casting chambers, each measuring 1\" x 1\" x 6.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":47619004268777,"sku":null,"price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/products\/DinoBone4-top.png?v=1650379681"},{"product_id":"dogbone-mini-shorts-16-slot","title":"Dogbone Mini Shorts 16-Slot","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIf you enjoy clear casting labels, watch parts, skins, hybrids, etc. and are looking for a semi-permanent solution for tube-in casting, then the new Maneater Crafts “DogBone” tube-in casting mold is for you! It’s a single mold solution that is super simple to use and will work with the majority of turning kits on the market (not to exceed tubes over 12.5mm in diameter). It’s literally a one mold fits all solution!! That includes most pen kits, seam rippers, razors and even darts!\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eWhat makes the DogBone so special? To start, it is milled from solid HDPE and is virtually indestructible. It won’t warp or crack like silicone molds. It features SIXTEEN 2.5” x .75” chambers. Perfect for casting short blanks. Total mold size approximately is 9\" x 7.25\" x 1.25\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eWhat else is special about the DogBone? Well, the unique design allows the molds to stack one on top of the other. They will self-align with the included rubber feet and if pressure casting in a 2.5 gal pot, you can stack them up to six molds high and two stacks side by side. That gives you the ability to cast up to 24 blanks at a time!! And best of all, no mold caddy it needed!! That makes this mold ideal for hobby casters and volume casters alike!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe DogBone is strictly intended for tube-in casting since the chambers don’t include bottom plugs to assist with blank removal. If you are interested in casting full chamber blanks then please try one of the other Maneater molds. All of the usual casting resins will work great, including Royal Palm, Alumilite and PR (polyester resin). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":47705731858665,"sku":null,"price":39.95,"currency_code":"USD","in_stock":false}]},{"product_id":"duckbone-mold-6-x-1-5-x-1-5","title":"DuckBone Mold - 6?x 1.5? x 1.5? Casting System","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eImportant Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Maneater","offers":[{"title":"DuckBone Complete System","offer_id":47705788186857,"sku":"","price":64.95,"currency_code":"USD","in_stock":true},{"title":"DuckBone Plug Pair","offer_id":47705788219625,"sku":"","price":10.95,"currency_code":"USD","in_stock":true},{"title":"DuckBone Tube","offer_id":47705788252393,"sku":"","price":2.0,"currency_code":"USD","in_stock":true},{"title":"DuckBone Mold Only","offer_id":47726068662505,"sku":"","price":52.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/A75303F0-DBDB-4D64-A062-4630480F13DA_1_105_c.jpg?v=1733254445"},{"product_id":"turkey-pot-mold-single-chamber","title":"Turkey Pot Mold - Single Chamber","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out. These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has a casting chambers measuring \u003cmeta charset=\"utf-8\"\u003e4\" round x 1.5\" deep. The blanks can easily be end trimmed on a table saw, if so desired.\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Silicone or Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":47705862045929,"sku":null,"price":45.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/EE9C64EB-5CF3-49FC-92A3-D08ECD3839A5_1_105_c.jpg?v=1733254353"},{"product_id":"dinobone-single-combo-casting-system-5-25-pen-blanks","title":"DinoBone Single - Combo Casting System - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold system has overall dimensions of 7.25\" x 3.75\" x 1.60\" with single casting chamber, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIncludes four large stopper silicone inserts and four small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27\/64\" in diameter.  The large stoppers will accommodate tubes 27\/64\" - 13.2mm. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":47705876463849,"sku":null,"price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/319AF7D9-5DE7-4592-8F39-02A4F1635FE3_1_105_c.jpg?v=1733254524"},{"product_id":"dogbone-single-tube-in-casting-mold-white","title":"Dogbone Single - Tube-In Casting Mold (White)","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIf you enjoy clear casting labels, watch parts, skins, hybrids, etc. and are looking for a semi-permanent solution for tube-in casting, then the new Maneater Crafts “DogBone” tube-in casting mold is for you! It’s a single mold solution that is super simple to use and will work with the majority of turning kits on the market (not to exceed tubes over 12.5mm in diameter). It’s literally a one mold fits all solution!! That includes most pen kits, seam rippers, razors and even darts!\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eWhat makes the DogBone so special? To start, it is milled from solid HDPE and is virtually indestructible. It won’t warp or crack like silicone molds. It features a single 5.5” x .75” chambers and two pair of silicone inserts. One pair has small stoppers for 7mm - 3\/8” tubes. The other pair has stoppers for 3\/8” - 12.5mm tubes. The inserts are replaceable at a cost of $8 per set. The mold body should last for years if properly cared for.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eWhat else is special about the DogBone? Well, the unique design allows the molds to stack one on top of the other. They will self-align with the included rubber feet and if pressure casting in a 2.5 gal pot, you can stack them up to six molds high and two stacks side by side. That gives you the ability to cast up to 24 blanks at a time!! And best of all, no mold caddy it needed!! That makes this mold ideal for hobby casters and volume casters alike!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThe DogBone is strictly intended for tube-in casting since the chambers don’t include bottom plugs to assist with blank removal. If you are interested in casting full chamber blanks then please try one of the other Maneater molds. All of the usual casting resins will work great, including Royal Palm, Alumilite and PR (polyester resin). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":47705883803881,"sku":null,"price":19.95,"currency_code":"USD","in_stock":true}]},{"product_id":"gator-mold-replacement-blue-silicone-plugs","title":"Gator Mold - Replacement Blue Silicone Plugs","description":"\u003cp\u003eThe plugs are replacements for our Maneater line of HDPE molds.\u003cbr\u003e\u003cbr\u003eThe Large Pentagon Blue Silicone plugs are typically used for the center plugs of our larger molds like the Gator block molds.\u003c\/p\u003e\n\u003cp\u003eThe Small Round \u003cmeta charset=\"utf-8\"\u003eBlue Silicone plugs are used in the slot plugs of our Dinobone molds and other smaller molds.\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Large 10-pak","offer_id":48422299861225,"sku":null,"price":4.95,"currency_code":"USD","in_stock":true},{"title":"Small 10-pk","offer_id":48422299893993,"sku":null,"price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/786AF6D8-BA97-4477-8D11-EF80B46B3921_1_105_c.jpg?v=1754247917"},{"product_id":"dinobone-2-mold-body-5-25-pen-blanks-seconds","title":"DinoBone 2 - Mold Body - 5.25\" x 7\/8\" Pen Blanks [[SECONDS]] 40% Off","description":"\u003ch2 dir=\"ltr\" data-pm-slice=\"1 1 []\"\u003e\u003cstrong\u003eSpecial Offer: 40% Off Due to Manufacturing Error\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\" data-pm-slice=\"1 1 []\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003e\u003cstrong\u003eNOT FOR USE WITH LABEL TUBE CASTING\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" data-pm-slice=\"1 1 []\"\u003eThese DinoBone 2-Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are \u003cstrong\u003eideal for single blank casting\u003c\/strong\u003e with solid resin or hybrid resin, producing high-quality pen blanks.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\" data-pm-slice=\"1 1 []\"\u003eTo easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eCrafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eMold Specifications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e- Dimensions\u003c\/strong\u003e: 7\" x 3.75\" x 1.60\"\u003cbr\u003e\u003cstrong\u003e- Casting Chambers\u003c\/strong\u003e: Two chambers, each 5.25\" x 0.863\" x 1.0\"\u003cbr\u003e\u003cstrong\u003e- Material\u003c\/strong\u003e: Milled HDPE for durability\u003cbr\u003e\u003cstrong\u003e- Features\u003c\/strong\u003e: Stackable, reusable, easy demolding, flattened ears for identification\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eUsage Instructions\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eApply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003ca href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-wax-mold-release\" title=\"Maneater Wax Mold Release\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/wax_mold_release_240x240.webp?v=1665191567\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e     \u003ca href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-silicone-mold-release\" title=\"Maneater Silicone Mold Release\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/Silicone_Mold_Release_240x240.webp?v=1665191559\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cstrong\u003eWhy Buy These Seconds?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eDespite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eThese molds are \u003cstrong\u003eNOT\u003c\/strong\u003e compatible with any tube casting plugs due to the 0.5mm oversized slots. The flattened ears on the ends identify them as SECONDS. Trim blanks on a table saw for precise squaring, if needed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoPlugPair-Large-NO_240x240.png?v=1749598317\" alt=\"Silicone Plugs are NOT compatible\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch3 dir=\"ltr\"\u003eGet these high-quality molds at a 40% discount while supplies last!\u003c\/h3\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48478478926057,"sku":null,"price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoBone2-top-SECOND.png?v=1749599743"},{"product_id":"dinobone-1-mold-body-5-25-pen-blanks-seconds-40-off","title":"DinoBone 1 - Mold Body - 5.25\" x 7\/8\" Pen Blanks [[SECONDS]] 40% Off","description":"\u003ch2\u003e\u003cstrong\u003eSpecial Offer: 40% Off Due to Manufacturing Error\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003e\u003cstrong\u003eNOT FOR USE WITH LABEL TUBE CASTING\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThese DinoBone 1 Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are \u003cstrong\u003eideal for single blank casting\u003c\/strong\u003e with solid resin or hybrid resin, producing high-quality pen blanks.\u003c\/p\u003e\n\u003ch3\u003eTo easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.\u003c\/h3\u003e\n\u003cp\u003eCrafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eMold Specifications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e- Dimensions\u003c\/strong\u003e: 7\" x 2.25\" x 1.60\"\u003cbr\u003e\u003cstrong\u003e- Casting Chambers\u003c\/strong\u003e: Single chamber, 5.25\" x 0.863\" x 1.0\"\u003cbr\u003e\u003cstrong\u003e- Material\u003c\/strong\u003e: Milled HDPE for durability\u003cbr\u003e\u003cstrong\u003e- Features\u003c\/strong\u003e: Stackable, reusable, easy demolding, flattened ears for identification\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eUsage Instructions\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003eApply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003ca href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-wax-mold-release\" title=\"Maneater Wax Mold Release\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/wax_mold_release_240x240.webp?v=1665191567\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e     \u003ca href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-silicone-mold-release\" title=\"Maneater Silicone Mold Release\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/Silicone_Mold_Release_240x240.webp?v=1665191559\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Buy These Seconds?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDespite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eThese molds are \u003cstrong\u003eNOT\u003c\/strong\u003e compatible with any tube casting plugs due to the 0.5mm oversized slots. The flattened ears on the ends identify them as SECONDS. Trim blanks on a table saw for precise squaring, if needed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoPlugPair-Large-NO_240x240.png?v=1749598317\" alt=\"Silicone Plugs are NOT compatible\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch3\u003eGet these high-quality molds at a 40% discount while supplies last!\u003c\/h3\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48478535385321,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoBone1-top-SECOND.png?v=1749599743"},{"product_id":"dinobone-3-mold-body-5-25-pen-blanks-seconds-40-off","title":"DinoBone 3 - Mold Body - 5.25\" x 7\/8\" Pen Blanks [[SECONDS]] 40% Off","description":"\u003ch2\u003e\u003cstrong\u003eSpecial Offer: 40% Off Due to Manufacturing Error\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003e\u003cstrong\u003eNOT FOR USE WITH LABEL TUBE CASTING\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThese DinoBone 1 Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are \u003cstrong\u003eideal for single blank casting\u003c\/strong\u003e with solid resin or hybrid resin, producing high-quality pen blanks.\u003c\/p\u003e\n\u003ch3\u003eTo easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.\u003c\/h3\u003e\n\u003cp\u003eCrafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eMold Specifications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e- Dimensions\u003c\/strong\u003e: 7\" x 5.25\" x 1.60\"\u003cbr\u003e\u003cstrong\u003e- Casting Chambers\u003c\/strong\u003e: Three chambers, 5.25\" x 0.863\" x 1.0\"\u003cbr\u003e\u003cstrong\u003e- Material\u003c\/strong\u003e: Milled HDPE for durability\u003cbr\u003e\u003cstrong\u003e- Features\u003c\/strong\u003e: Stackable, reusable, easy demolding, flattened ears for identification\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eUsage Instructions\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003eApply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003ca title=\"Maneater Wax Mold Release\" href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-wax-mold-release\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/wax_mold_release_240x240.webp?v=1665191567\"\u003e\u003c\/a\u003e     \u003ca title=\"Maneater Silicone Mold Release\" href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-silicone-mold-release\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/Silicone_Mold_Release_240x240.webp?v=1665191559\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Buy These Seconds?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDespite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eThese molds are \u003cstrong\u003eNOT\u003c\/strong\u003e compatible with any tube casting plugs due to the 0.5mm oversized slots. The flattened ears on the ends identify them as SECONDS. Trim blanks on a table saw for precise squaring, if needed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"Silicone Plugs are NOT compatible\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoPlugPair-Large-NO_240x240.png?v=1749598317\"\u003e\u003c\/div\u003e\n\u003ch3\u003eGet these high-quality molds at a 40% discount while supplies last!\u003c\/h3\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48478555111657,"sku":null,"price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoBone3-top-SECOND.png?v=1749599743"},{"product_id":"dogbone-1-mold-body-5-5-pen-blanks-seconds-40-off","title":"DogBone 1 - Mold Body - 5.5\" x 3\/4\" Pen Blanks [[SECONDS]] 40% Off","description":"\u003ch2\u003e\u003cstrong\u003eSpecial Offer: 40% Off Due to Manufacturing Error\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003e\u003cstrong\u003eNOT FOR USE WITH LABEL TUBE CASTING\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThese Dogbone 1 Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are \u003cstrong\u003eideal for single blank casting\u003c\/strong\u003e with solid resin or hybrid resin, producing high-quality pen blanks.\u003c\/p\u003e\n\u003ch3\u003eTo easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.\u003c\/h3\u003e\n\u003cp\u003eCrafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eMold Specifications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e- Dimensions\u003c\/strong\u003e: 6.5\" x 3.25\" x 1.25\"\u003cbr\u003e\u003cstrong\u003e- Casting Chambers\u003c\/strong\u003e: Single chamber, 5.5\" x 0.77\" x 1.0\"\u003cbr\u003e\u003cstrong\u003e- Material\u003c\/strong\u003e: Milled HDPE for durability\u003cbr\u003e\u003cstrong\u003e- Features\u003c\/strong\u003e: Stackable, reusable, easy demolding, flattened ears for identification\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eUsage Instructions\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003eApply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003ca title=\"Maneater Wax Mold Release\" href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-wax-mold-release\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/wax_mold_release_240x240.webp?v=1665191567\"\u003e\u003c\/a\u003e     \u003ca title=\"Maneater Silicone Mold Release\" href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-silicone-mold-release\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/Silicone_Mold_Release_240x240.webp?v=1665191559\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Buy These Seconds?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDespite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eThese molds are not compatible with tube casting plugs due to the 0.5mm oversized slots and are designed exclusively for single blank casting. The flattened ears on the ends clearly identify them as SECONDS. For precise squaring, trim blanks on a table saw if needed. The bottom hole slot plugs, designed for the DinoBone mold series, are compatible but require adaptation of their usage for the DogBone mold. Ensure the silicone slot plugs are trimmed to fit flush with the DinoBone mold base to prevent indentations in your blanks, but they need to be pulled back slightly as shown below for the DogBone Molds.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DogPlug-FullSet-SECOND_240x240.png?v=1749607379\"\u003e    \u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DogPlug-Closeup-SECOND_3e97f5b5-250a-4f1a-b085-bb15c7031fb8_240x240.png?v=1749608621\"\u003e\n\u003c\/div\u003e\n\u003ch3\u003eGet these high-quality molds at a 40% discount while supplies last!\u003c\/h3\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48478605312233,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DogBone1-top-SECOND.png?v=1749609967"},{"product_id":"dogbone-2-mold-body-5-5-pen-blanks-seconds-40-off","title":"DogBone 2 - Mold Body - 5.5\" x 3\/4\" Pen Blanks [[SECONDS]] 40% Off","description":"\u003ch2\u003e\u003cstrong\u003eSpecial Offer: 40% Off Due to Manufacturing Error\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003e\u003cstrong\u003eNOT FOR USE WITH LABEL TUBE CASTING\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThese DogBone 1 Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are \u003cstrong\u003eideal for single blank casting\u003c\/strong\u003e with solid resin or hybrid resin, producing high-quality pen blanks.\u003c\/p\u003e\n\u003ch3\u003eTo easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.\u003c\/h3\u003e\n\u003cp\u003eCrafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eMold Specifications\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e- Dimensions\u003c\/strong\u003e: 6.5\" x 3.25\" x 1.25\"\u003cbr\u003e\u003cstrong\u003e- Casting Chambers\u003c\/strong\u003e: Single chamber, 5.5\" x 0.77\" x 1.0\"\u003cbr\u003e\u003cstrong\u003e- Material\u003c\/strong\u003e: Milled HDPE for durability\u003cbr\u003e\u003cstrong\u003e- Features\u003c\/strong\u003e: Stackable, reusable, easy demolding, flattened ears for identification\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eUsage Instructions\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003eApply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003ca href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-wax-mold-release\" title=\"Maneater Wax Mold Release\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/wax_mold_release_240x240.webp?v=1665191567\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e     \u003ca href=\"https:\/\/stadiumpenblanks.com\/products\/maneater-silicone-mold-release\" title=\"Maneater Silicone Mold Release\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/Silicone_Mold_Release_240x240.webp?v=1665191559\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Buy These Seconds?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDespite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eThese molds are not compatible with tube casting plugs due to the 0.5mm oversized slots and are designed exclusively for single blank casting. The flattened ears on the ends clearly identify them as SECONDS. For precise squaring, trim blanks on a table saw if needed. The bottom hole slot plugs, designed for the DinoBone mold series, are compatible but require adaptation of their usage for the DogBone mold. Ensure the silicone slot plugs are trimmed to fit flush with the DinoBone mold base to prevent indentations in your blanks, but they need to be pulled back slightly as shown below for the DogBone Molds.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DogPlug-FullSet-SECOND_240x240.png?v=1749607379\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DogPlug-Closeup-SECOND_3e97f5b5-250a-4f1a-b085-bb15c7031fb8_240x240.png?v=1749608621\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\u003c\/div\u003e\n\u003ch3\u003eGet these high-quality molds at a 40% discount while supplies last!\u003c\/h3\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48478651875561,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DogBone2-top-SECOND.png?v=1749609967"},{"product_id":"gator-mold-stopper-mold-quad-socket-1-5-round-x-2-5-tall","title":"Gator Mold - Stopper Mold - Quad Socket 1.5\" round x 2.5\" tall","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR THE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 4.5\" sq x 3\" tall with FOUR casting chambers, each measuring 2.5\" tall x 1.5\" round.  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  \u003cspan\u003eThe blanks can easily be end trimmed and squared up on a table saw, if so desired. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48648227029225,"sku":null,"price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/F005A208-510C-4373-AF01-E346E27F0315_1_105_c.jpg?v=1754248336"},{"product_id":"gator-mold-stopper-mold-15-socket-1-5-round-x-2-5-tall","title":"Gator Mold - Stopper Mold - 15 Socket - 1.5\" round x 2.5\" tall","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR THE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 10.5\" x. 6.5\" x 3.125\" tall with FIFTEEN casting chambers, each measuring 2.5\" tall x 1.5\" round.  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  \u003cspan\u003eThe blanks can easily be end trimmed and squared up on a table saw, if so desired. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48648229814505,"sku":null,"price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/GatorMoldStoper15-2.jpg?v=1778259372"},{"product_id":"gator-mold-12-x-5-25-jumbo-block-mold","title":"Gator Mold - 12\" x 5.25\" JUMBO Block Mold","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR\u003c\/strong\u003e \u003cstrong\u003eTHE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 13.25\" x 6.5\" x 2.125\" with one \u003cstrong\u003eJUMBO\u003c\/strong\u003e casting chamber measuring 12\" x 5.25\" 1.2\".  Up to \u003cstrong\u003eTHIRTEEN\u003c\/strong\u003e pen blanks 13\/16\" can be cut from the block and they can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48648239743209,"sku":null,"price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/GatorMoldJumboBlock-2.png?v=1778259439"},{"product_id":"dinobone-10-mold-body-5-25-pen-blanks","title":"DinoBone 10 - Mold Body - 5.25\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold body has overall dimensions of 13.25\" x 6.50\" x 1.60\" with TEN casting chambers, each measuring 5.25\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48648265531625,"sku":null,"price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoBone10Slot-1.jpg?v=1778259502"},{"product_id":"dinobone-8-long-mold-body-6-pen-blanks","title":"DinoBone 8 LONG - Mold Body - 6\" Pen Blanks","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  \u003cspan\u003e\u003cstrong\u003eAnd best of all, they stack!!  There is no need for a casting rack!\u003c\/strong\u003e  \u003c\/span\u003eDemolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis mold body has overall dimensions of 11.25\" x 7.25\" x 1.60\" with EIGHT casting chambers, each measuring 6\" x .84375\" x 1.0\".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":48648277688553,"sku":null,"price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/DinoboneLong8Slot-2.jpg?v=1778259295"},{"product_id":"dogbone-8-slot-tube-in-casting-mold","title":"DogBone 8-Slot Tube-In Casting Mold","description":"\u003cp dir=\"auto\"\u003eHigh-capacity 8-slot HDPE casting mold designed specifically for DogBone label casting plugs. Cast two tubes per slot for Jr. Gent, Sierra Clone, Bolt Action, and most other common pen kits.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eProduct Description (copy\/paste ready):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eIf you love label casting with dogbone plugs and want serious production capacity, this 8-slot tube-in casting mold is the perfect upgrade. Designed to accommodate our dogbone label casting plugs, it lets you cast \u003cstrong\u003etwo tubes per slot\u003c\/strong\u003e for most popular pen kits (Jr. Gent, Sierra Clone, Bolt Action, and more).\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eEach slot measures 7\" long, giving you plenty of room for full-length blanks with excellent results. The mold is precision-milled from durable, virtually indestructible HDPE — no warping or cracking like flexible silicone molds.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 slots\u003c\/strong\u003e — cast up to 16 tubes (2 per slot) in a single pour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7\" slot length\u003c\/strong\u003e — ideal for standard pen blanks\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003cmeta charset=\"utf-8\"\u003eDogBone label casting plugs\u003c\/li\u003e\n\u003cli\u003eWorks with all common tube sizes (Jr. Gent, Sierra Clone, Bolt Action, etc.)\u003c\/li\u003e\n\u003cli\u003eDesigned for pressure casting in \u003cstrong\u003e5-gallon or larger\u003c\/strong\u003e resin pressure pots (will \u003cstrong\u003eNOT\u003c\/strong\u003e fit in 2.5-gallon pots)\u003c\/li\u003e\n\u003cli\u003eRobust construction built for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eThis mold is strictly intended for \u003cstrong\u003etube-in \/ label casting\u003c\/strong\u003e. All standard casting resins perform great, including JB Royal Epoxy, Alumilite urethane, other epoxy resins, and polyester resins.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eA good \u003cstrong\u003erelease agent\u003c\/strong\u003e is required. We highly recommend applying it thoroughly to the chambers and any plugs\/inserts before pouring.\u003c\/li\u003e\n\u003cli\u003eFor easiest demolding, use a rubberized dead blow hammer after full cure. Tap the bottom and sides, then flip and tap the ends on your workbench.\u003c\/li\u003e\n\u003cli\u003eAlumilite and polyester blanks typically release very easily. Epoxy blanks may need a few extra taps or a blast of compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eUsage Tips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eAlways pressure cast when possible for bubble-free results.\u003c\/li\u003e\n\u003cli\u003eTest your setup in your pressure pot before full production runs.\u003c\/li\u003e\n\u003cli\u003eClean the mold thoroughly after each use for maximum lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eThis heavy-duty mold is perfect for serious hobbyists and volume casters who want reliable, repeatable results with \u003cmeta charset=\"utf-8\"\u003eDogBone label casting.\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":50982667878633,"sku":null,"price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/files\/8sloddogbonemold.jpg?v=1778554141"},{"product_id":"gator-mold-stopper-mold-six-socket-1-5-round-x-2-5-tall","title":"Gator Mold - Stopper Mold - SIX Socket 1.5\" round x 2.5\" tall","description":"\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eIntroducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to \u003cstrong\u003eDEVOUR THE COMPETITION!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eThis model has overall dimensions of 4.5\" sq x 3\" tall with SIX casting chambers, each measuring 2.5\" tall x 1.5\" round.  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  \u003cspan\u003eThe blanks can easily be end trimmed and squared up on a table saw, if so desired. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003eA rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: small;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maneater","offers":[{"title":"Default Title","offer_id":51106906734825,"sku":null,"price":69.95,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0351\/5256\/0259\/collections\/DinoBone4-Combo-1.png?v=1650602147","url":"https:\/\/stadiumpenblanks.com\/collections\/maneater-hdpe-molds.oembed?page=3","provider":"Stadium Pen Blanks","version":"1.0","type":"link"}