811 products
Sort by:
811 products
Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry. These are semi-permanent in nature. They won't warp or crack but will take lots of abuse, unlike traditional silicone molds. These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene). And best of all, they stack!! There is no need for a casting rack. Demolding is easy! Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out. These true beasts are designed to DEVOUR THE COMPETITION!
This model has overall dimensions of 3.5" x 1.75" x 1.25" with two casting chambers, each measuring 1.25" round x .625" deep. The blanks can easily be end trimmed and squared up on a table saw or bandsaw, if so desired.
Important Notes:
A release agent must be used due to the rigidity of the molds. Maneater Wax Mold Release is highly recommended. Just brush the release agent into the chambers, ensuring complete coverage. Allow to dry before pouring your resin. Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage.
A rubberized dead blow hammer will help the demold process greatly. Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release. Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all. Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.
Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry. These are semi-permanent in nature. They won't warp or crack but will take lots of abuse, unlike traditional silicone molds. These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene). And best of all, they stack!! There is no need for a casting rack! Demolding is easy! Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out. These true beasts are designed to DEVOUR THE COMPETITION!
This mold body has overall dimensions of 8.25" x 7.25" x 1.60" with four casting chambers, each measuring 1" x 1" x 6.0". The blanks can easily be end trimmed and squared up on a table saw, if so desired.
Important Notes:
A release agent must be used due to the rigidity of the molds. Maneater Wax Mold Release is highly recommended. Just brush the release agent into the chambers, ensuring complete coverage. Allow to dry before pouring your resin. Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage.
A rubberized dead blow hammer will help the demold process greatly. Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release. Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all. Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.
These blanks are made with game used jersey relics from Lou Gehrig of the New York Yankees and paired with wood from an original 1923 straight back Yankee Stadium seat.
Lou Gehrig Relic Blanks:
- Real MLB Game Played Jersey relic.
- These blanks sold in sierra clones, PSI Baseball, and Jr Sets
- Wood used is from an original 1923 straight back Yankee Stadium Seat
- All blanks will come with one COA per blank.
- COAs are 4" x 6" card stock with foil embossed COA seal.
- Custom tube sizes available (two-three week delivery)
Hardin Penworks, LLC, certifies that material supplied to the artisan of the accompanying hand-crafted item was sourced from a game used #4 jersey swatch of the New York Yankees’ Lou Gehrig and original 1923 wooden straight back seat slats from Yankee Stadium.
Henry Louis Gehrig was a baseball first baseman who played 17 seasons in the MLB for the New York Yankees from 1923 to 1939. Gehrig was renowned for his prowess as a hitter and for his durability, which earned him his nickname "The Iron Horse".
He was an All-Star seven consecutive times, a Triple Crown winner once, an American League MVP twice, and a member of six World Series champion teams. He had a career .340 batting average, .632 slugging average, and a .447 on base average. He hit 493 home runs and had 1,995 RBIs. He set several major-league records during his career, including the most career grand slams at 23 and most consecutive games played at 2,130. Gehrig's consecutive game streak ended on May 2, 1939, due to amyotrophic lateral sclerosis, an incurable neuromuscular illness now commonly referred to as "Lou Gehrig's disease".
Gehrig was elected to the Baseball Hall of Fame in 1939 and the first MLB player to have his uniform number retired by a team.
This material is guaranteed to be 100% Authentic.
Feel free to message us for any questions.
facebook.com/StadiumPenBlanks/
Michael@StadiumPenBlanks.com
Watch Part Steampunk Jr Cap.
These blanks are 12.5mm tubes used with the common Jr Gent sized kits. These sports team blanks pair excellently with team specific stadium seat material found on the Georgetown Hoyas's stadium blank page
The list below is not a complete list, but it is a great starting point list to find your desired kit.
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Falcons Flight into Dome Dynasty – Snag Your Georgia Glory!
Envision soaring for a touchdown with a pen slashed from seats that vibrated with Falcons fervor at the Georgia Dome, or uncorking NFC conquests with a stopper surging in black-red blaze. From end-zone rings reliving Vick's verticals to sideline-tough knives carving post-game peach cobbler feasts—each talisman is lathe-born from genuine dome grit, spiraling Super Bowl surges into heirloom hauls. Rally your row and unleash the Dirty Birds' relentless rise in every revolution!
Georgia Dome: Falcons' Atlanta Apex of Gridiron Glory
The Georgia Dome, a pioneering dome of Southern sports supremacy, loomed large in downtown Atlanta—a Teflon-coated titan birthed to host the 1996 Centennial Olympics and anchor the Falcons' ascent. Conceived in the mid-1980s amid Atlanta's global ambitions, the $214 million marvel—funded by state bonds and hotel taxes—broke ground in November 1989 and soared open on August 18, 1992, with the Atlanta Braves edging the Cubs 1-0 in MLB exhibition before 50,000 fans—heralding a new era of dome dominance and instantly etching its silver saucer into Georgia's skyline.
Enveloping 71,228 football faithful in climate-controlled comfort on AstroTurf (FieldTurf by 2003), the Dome delivered bone-rattling intimacy on a standard 120x53-yard battlefield—fostering fast-break frenzy under its 23-acre Teflon roof (world's largest at debut). Facelifts flared: 1992's initial 70,000 swell, 1997's $10 million lighting upgrades, 2003's $30 million FieldTurf and suite surge, and 2013's $30 million video board vault—blending innovative engineering with fan-favorite fury via Georgia World Congress Center ties.
Falcons' fortress from 1992-2016, the Dome cradled NFC Championship triumphs (1998, 2004, 2012—all home-fueled), Michael Vick's electric era, Matt Ryan's MVP magic (2016), and Super Bowl LI heartbreak (28-3 lead lost to Patriots) amid 300+ home wins. Record roars hit 71,500 for 1999's playoff pulse, pulsing with "Rise Up" anthems and tailgate traditions. Demolished in 2017 for Mercedes-Benz Stadium's gleam, Georgia Dome endures as a Teflon testament to tenacity, triumphs, and timeless Dirty Bird in NFL's south.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Hawks Soar into Dome Drama – Snag Your Georgia Glory!
Envision slamming a game-winning dunk with a pen slashed from seats that echoed with Hawks hustle at the Georgia Dome, or uncorking playoff pulses with a stopper surging in red-black blaze. From hardwood rings reliving Wilkins' windmills to bench-tough knives carving post-game peach cobbler feasts—each talisman is lathe-born from genuine dome grit, soaring temporary triumphs into heirloom highlights. Rally your rim and unleash the Hawks' relentless rise in every revolution!
Georgia Dome: Hawks' Temporary Dome of Hoops Heritage
The Georgia Dome, a pioneering dome of Southern sports supremacy, loomed large in downtown Atlanta—a Teflon-coated titan birthed to host the 1996 Centennial Olympics and serve as a temporary haven for the Hawks amid arena transitions. Conceived in the mid-1980s amid Atlanta's global ambitions, the $214 million marvel—funded by state bonds and hotel taxes—broke ground in November 1989 and soared open on August 18, 1992, initially for baseball exhibitions but quickly adapting for hoops. For the Atlanta Hawks, it became a crucial stopgap from 1997 to 1999 during Philips Arena's construction, hosting 82 regular-season games and etching temporary triumphs into franchise lore.
Enveloping up to 71,228 basketball faithful in climate-controlled comfort on polished hardwood (standard 94x50-foot NBA court), the Dome delivered cauldron-close chaos under its 23-acre Teflon roof (world's largest at debut)—fostering fast-break frenzy with premium sightlines and those expansive upper decks. Facelifts flared: 1997's hoops-specific adaptations including court setups and lighting tweaks, 1998's record-shattering attendance surges, and overall $30 million video board vaults—blending innovative engineering with fan-favorite fury via Georgia World Congress Center ties.
Hawks' interim home for two pivotal seasons, the Dome cradled a then-NBA single-game attendance record of 62,046 on March 27, 1998, against Michael Jordan's Chicago Bulls—one of MJ's final regular-season tilts—plus playoff pulses like the 1999 first-round exit to Knicks amid Wilkins-era echoes and Mutombo's blocks. Pulsing with "Rise Up" precursors and Southern hospitality, it hosted 100+ Hawks games, pulsing with temporary tenacity. Demolished in 2017 for Mercedes-Benz Stadium's gleam, Georgia Dome endures as a Teflon testament to transition triumphs and timeless Hawk spirit in NBA's south.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Panther Prowl into Dome Dominance – Snag Your Georgia Glory!
Envision prowling for a game-winning scramble with a pen slashed from seats that echoed with Panther pride at the Georgia Dome, or uncorking CAA conquests with a stopper surging in blue-white blaze. From end-zone rings reliving Raines' rushes to sideline-tough knives carving post-game peach cobbler feasts—each talisman is lathe-born from genuine dome grit, pouncing playoff pulses into heirloom hauls. Rally your row and unleash the Panthers' relentless roar in every revolution!
Georgia Dome: Panthers' Atlanta Apex of Gridiron Glory
The Georgia Dome, a pioneering dome of Southern sports supremacy, loomed large in downtown Atlanta—a Teflon-coated titan birthed to host the 1996 Centennial Olympics and ignite Georgia State University's fledgling football program. Conceived in the mid-1980s amid Atlanta's global ambitions, the $214 million marvel—funded by state bonds and hotel taxes—broke ground in November 1989 and soared open on August 18, 1992, initially for exhibitions but quickly becoming the launchpad for GSU Panthers football in 2010. It served as their inaugural home, hosting the program's FCS debut with a 41-7 thrashing of Shorter University before 20,000 fans—heralding a new era of Panther power and urban athletic ascent.
Enveloping up to 71,228 football faithful in climate-controlled comfort on FieldTurf, the Dome delivered bone-rattling intimacy on a standard 120x53-yard battlefield—fostering fast-break frenzy under its 23-acre Teflon roof (world's largest at debut). For GSU, it amplified the program's rapid rise from FCS startup to Sun Belt contender, with expansions like 1997's lighting upgrades and 2003's turf tweaks enhancing the electric atmosphere. Facelifts flared: 2013's $30 million video board vault—blending innovative engineering with fan-favorite fury via Georgia World Congress Center ties.
Panthers' prowling ground from 2010-2016, the Dome cradled FCS playoff pulses (2011, 2012), the 2012 CAA South Division title, and Raines' rushing records amid 30+ home wins and sellout surges. Record roars hit 28,647 for 2014's Georgia Tech clash, pulsing with "Hail Southern" anthems and tailgate traditions. Demolished in 2017 for Mercedes-Benz Stadium's gleam, Georgia Dome endures as a Teflon testament to tenacity, triumphs, and timeless Panther spirit in college football's south.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
Watch Part Steampunk Jr Cap.
These blanks are 12.5mm tubes used with the common Jr Gent sized kits. These sports team blanks pair excellently with team specific stadium seat material found on the Georgia Bulldogs' stadium blank page for the University of Georgia.
The list below is not a complete list, but it is a great starting point list to find your desired kit.
Sierra and Bolt embedded blanks with WWII German A-4 V-2 Ballistic Missile - "Vengeance Weapon 2" recovered relic material.
All blanks will come with one COA per blank.
COAs are 4" x 6" card stock with foil COA seal.
The German V-2 rocket, officially known as Vergeltungswaffe 2 (Vengeance Weapon 2) or Aggregat 4 (A-4), was the world's first long-range guided ballistic missile. Developed during World War II under the direction of Wernher von Braun at the Peenemünde Army Research Center, it first launched successfully in October 1942 and entered operational use in September 1944. Standing 46 feet tall with a diameter of 5.4 feet and weighing 27,000 pounds at launch, the V-2 was powered by a liquid-propellant engine using alcohol and liquid oxygen, achieving speeds over 3,500 mph (Mach 5) and a range of up to 200 miles. It carried a 2,200-pound Amatol warhead, striking targets like London and Antwerp with supersonic speed, making interception impossible. Over 3,000 V-2s were launched, causing significant civilian casualties and terror. Post-war, captured V-2 technology influenced U.S. and Soviet rocket programs, contributing to advancements in rocketry. Nicknamed "Buzzbomb" by some, though more accurately associated with the V-1, the V-2 was the first human-made object to reach space in suborbital flight.
These pen blanks are crafted from authentic fragments of a V-2 rocket, preserving its wartime history. Suitable for historians, collectors, or military enthusiasts, they provide a connection to this missile's past through a functional writing instrument.
Relic History: The fragments originate from a V-2 rocket launched on March 2, 1945. These pieces document German rocketry efforts during the final stages of World War II, offering a tangible link to one of the weapons used in that period.
Sierra and Bolt embedded blanks with WWII German Fi 103 V-1 Flying Bomb "Vengeance Weapon 1" recovered relic material.
All blanks will come with one COA per blank.
COAs are 4" x 6" card stock with foil COA seal.
The V-1 flying bomb (German: Vergeltungswaffe 1 "Vengeance Weapon 1") was an early cruise missile. Its official Reich Aviation Ministry (RLM) designation was Fieseler Fi 103 and its suggestive name was Höllenhund (hellhound). It was also known to the Allies as the buzz bomb or doodlebug and in Germany as Kirschkern (cherry stone) or Maikäfer (maybug).
The V-1 was the first of the Vergeltungswaffen (V-weapons) deployed for the terror bombing of London. It was developed at Peenemünde Army Research Center in 1939 by the Luftwaffe at the beginning of the Second World War, and during initial development was known by the codename "Cherry Stone". Due to its limited range, the thousands of V-1 missiles launched into England were fired from launch facilities along the French (Pas-de-Calais) and Dutch coasts or by modified He 111 aircraft.
The Wehrmacht first launched the V-1s against London on 13 June 1944,[6] one week after (and prompted by) the successful Allied landings in France. At peak, more than one hundred V-1s a day were fired at southeast England, 9,521 in total, decreasing in number as sites were overrun until October 1944, when the last V-1 site in range of Britain was overrun by Allied forces. After this, the Germans directed V-1s at the port of Antwerp and at other targets in Belgium, launching a further 2,448 V-1s. The attacks stopped only a month before the war in Europe ended, when the last launch site in the Low Countries was overrun on 29 March 1945.
As part of operations against the V-1, the British operated an arrangement of air defences, including anti-aircraft guns, barrage balloons, and fighter aircraft, to intercept the bombs before they reached their targets, while the launch sites and underground storage depots became targets for Allied attacks including strategic bombing.
In 1944, a number of tests of this weapon were apparently conducted in Tornio, Finland. On one occasion, several Finnish soldiers saw a German plane launch what they described as a bomb shaped like a small, winged aircraft. The flight and impact of another prototype was seen by Finnish frontline soldiers; they noted that its engine stopped suddenly, causing the V-1 to descend sharply, and explode on impact, leaving a crater 20–30 metres (66–98 ft) wide. These V-1s became known to Finnish soldiers as "flying torpedoes".
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Big Blue Blitz into Meadowlands Mayhem – Snag Your Giants Glory!
Picture storming the end zone with a pen carved from seats that thundered with Giants grit at the Meadowlands, or uncorking Super Bowl toasts with a stopper surging in royal blue-red blaze. From Lombardi rings reliving LT's sacks to tailgate-tough knives carving post-game pastrami feasts—each powerhouse is lathe-forged from authentic stadium shards, blitzing playoff pandemonium into heirloom hits. Rally your row and unleash the G-Men's relentless rampage in every revolution!
Giants Stadium: Giants' Meadowlands Monument of Gridiron Greatness
Giants Stadium towered over the New Jersey Turnpike in East Rutherford, a concrete colossus of Big Blue bravado since its groundbreaking genesis. Conceived in the early 1970s to replace the creaky Yankee Stadium and Polo Grounds, the $78 million marvel—funded by New Jersey Sports and Exposition Authority bonds—broke ground in 1972 and roared open on October 10, 1976, with the Giants edging the Dallas Cowboys 14-10 before 76,042 fans—heralding a new era of Meadowlands might and instantly etching its dual-sport destiny into NFL lore.
Ballooning from 76,891 seats to a raucous 78,741 capacity on AstroTurf (swapped to grass in 2003), Giants Stadium encircled a standard 120x53-yard battlefield—fostering fender-banging frenzy with those iconic upper decks and end-zone scoreboards. Facelifts flared: 1984's $10 million lighting upgrades, 1994's $30 million club seating surge, 2000s' $100 million video board and suite expansions—blending raw, rattling intimacy with fan-favorite fury, all while sharing turf with the Jets until MetLife's 2010 call.
Giants' gridiron ground for 34 seasons, the stadium cradled two Super Bowl triumphs (1986 XX, 1990 XXV—both home-fueled feasts), LT's sack supremacy, Eli's heroics, and NFC East crowns amid 400+ home wins. Record roars hit 79,310 for 1981's playoff pulse vs. Eagles, pulsing with "New York, New York" anthems and tailgate traditions. Demolished in 2010 for parking paradise, Giants Stadium endures as a Meadowlands testament to tenacity, triumphs, and timeless Big Blue in NFL's northeast.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Jet Set for Sack Exchange Saga – Snag Your Meadowlands Mayhem!
Picture scrambling for a Broadway Joe bomb with a pen slashed from seats that shook with Jets' jetstream at the Meadowlands, or uncorking AFC anthems with a stopper surging in green-white blaze. From end-zone rings reliving Namath's guarantees to tailgate-tough knives carving post-game knish feasts—each powerhouse is lathe-forged from authentic stadium shards, jetting Super Bowl III glory into heirloom hauls. Rally your row and unleash the Jets' relentless rush in every revolution!
Giants Stadium: Jets' Meadowlands Monument of Gridiron Greatness
Giants Stadium towered over the New Jersey Turnpike in East Rutherford, a concrete colossus shared by the New York Jets and Giants since its groundbreaking genesis. Conceived in the early 1970s to replace the creaky Yankee Stadium and Polo Grounds, the $78 million marvel—funded by New Jersey Sports and Exposition Authority bonds—broke ground in 1972 and roared open on October 10, 1976, with the Giants edging the Dallas Cowboys 14-10 before 76,042 fans—heralding a new era of Meadowlands might and instantly etching its dual-sport destiny into NFL lore, with the Jets joining as tenants in 1984 after Shea Stadium's shade.
Ballooning from 76,891 seats to a raucous 78,741 capacity on AstroTurf (swapped to grass in 2003), Giants Stadium encircled a standard 120x53-yard battlefield—fostering fender-banging frenzy with those iconic upper decks and end-zone scoreboards. Facelifts flared: 1984's $10 million lighting upgrades, 1994's $30 million club seating surge, 2000s' $100 million video board and suite expansions—blending raw, rattling intimacy with fan-favorite fury, all while the Jets and Giants cohabited until MetLife's 2010 call.
Jets' jetstream ground for 26 seasons, the stadium cradled Super Bowl III's upset (1969 pre-park echoes in 1986's AFC Championship thriller), Namath's guarantees, Sack Exchange supremacy (1980s), and Mark Gastineau's records amid 300+ home wins. Record roars hit 79,310 for 1981's playoff pulse vs. Bills, pulsing with "J-E-T-S" chants and tailgate traditions. Demolished in 2010 for parking paradise, Giants Stadium endures as a Meadowlands testament to tenacity, triumphs, and timeless Jet green in NFL's northeast.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
These blanks are form a game used hockey stick from Randy Gilhen of the Pittsburgh Penguins.
Hockey Stick blanks:
- Real NHL Game Played Hockey stick.
- These blanks sold by the inch in 1" increments.
- All blanks will come with one COA per blank.
- COAs are 4" x 6" card stock with foil embossed COA seal.
- All blanks are cut as they are ordered.
Hardin Penworks, LLC, certifies that material supplied to the artisan of the accompanying hand-crafted item was sourced from a 1990 game used hockey stick from Randy Gilhen of the Pittsburgh Penguins.
Randy Gilhen is a Canadian retired ice hockey forward. Gilhen played 457 games in the National Hockey League (NHL). As a member of the 1991 Pittsburgh Penguins, Gilhen was the first German-born player to win the Stanley Cup. Born in Zweibrücken, West Germany, Gilhen grew up in Winnipeg, Manitoba.
Gilhen started his National Hockey League career with the Hartford Whalers in 1982 when he was the 109th overall pick in the 1982 NHL Draft. He also played for the Winnipeg Jets, Pittsburgh Penguins, Los Angeles Kings, New York Rangers, Tampa Bay Lightning, and Florida Panthers. His last NHL season was the 1996 season, after which he played two seasons with the Manitoba Moose before retiring in 1998. Gilhen is an "Honoured Member" of the Manitoba Hockey Hall of Fame.
This material is guaranteed to be 100% Authentic.
_______________________________________________________________________________________________
Feel free to message us for any questions.
facebook.com/StadiumPenBlanks/
Michael@StadiumPenBlanks.com
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Minuteman March into Gillette Glory – Snag Your Patriot Park Power!
Envision storming the end zone with a pen forged from seats that echoed with Minuteman might at Gillette, or uncorking CAA conquests with a stopper surging in maroon-white blaze. From gridiron rings reliving upset surges to tailgate-tough knives carving post-game lobster roll feasts—each emblem is lathe-born from genuine stadium grit, marching FCS fervor into heirloom hits. Rally your row and unleash the UMass's relentless rampage in every revolution!
Gillette Stadium: Minutemen's Borrowed Bastion of Gridiron Grit
Gillette Stadium, the gleaming gateway to New England's sports empire, sprawls across Foxborough, Massachusetts—a state-of-the-art spectacle birthed for the Patriots' dynasty dreams but lending its turf to the University of Massachusetts Minutemen for marquee matchups. Conceived in the late 1990s to replace the aging Foxboro Stadium, the $325 million marvel—funded by Kraft Group's private vision—broke ground in 2000 and roared open on September 9, 2002, with the Patriots edging the Steelers 30-14 before 68,756 fans—heralding Foxborough's football renaissance and instantly etching its lighthouse silhouette into NFL lore.
Boasting a thunderous 65,878 capacity on FieldTurf (standard 120x53.3-yard NFL battlefield), Gillette brews bone-crushing intimacy with those iconic end-zone scoreboards and skyline views—dimensions a runner's delight amid 80 luxury suites and 8,000 club seats. For UMass, it amplified FCS fireworks like the 2012 home opener (a 16-7 win over Indiana) and 2014's Black Friday clash vs. BYU, drawing record crowds. Facelifts flared: 2002's initial swell, 2015's $100 million "Project Green" adding social decks, and 2020s' tech tweaks—blending lighthouse legacy with modern mojo via Kraft stewardship.
Borrowed bastion for UMass Minutemen since 2012, Gillette has cradled CAA triumphs, playoff pulses like the 2018 quarterfinal surge, and stars amid 10+ games and growing legacies. Record roars for UMass hit 40,000+ for 2012's Indiana thriller, pulsing with "Sweet Caroline" echoes and tailgate traditions. Beyond gridiron gold, it hosts concerts and conventions, etching Foxborough's fierce spirit into lore. As Minutemen march for FBS futures, Gillette Stadium endures as a borrowed testament to tenacity, triumphs, and timeless turf in college football's northeast.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Patriot Power Play – Snag Your Gillette Glory!
Envision spiking a Super Bowl clincher with a pen forged from seats that thundered with Pats parades at Gillette, or uncorking Deflategate defiances with a stopper surging in navy-red blaze. From end-zone rings reliving Brady's bombs to tailgate-tough knives carving post-game lobster roll feasts—each talisman is lathe-born from genuine stadium grit, marching dynasty dashes into heirloom hits. Rally your row and unleash the Patriots' relentless rampage in every revolution!
Gillette Stadium: Patriots' Foxboro Fortress of Gridiron Glory
Gillette Stadium, the gleaming gateway to New England's sports empire, sprawls across Foxborough, Massachusetts—a state-of-the-art spectacle birthed for the Patriots' dynasty dreams. Conceived in the late 1990s to replace the aging Foxboro Stadium, the $325 million marvel—funded by Kraft Group's private vision—broke ground in 2000 and roared open on September 9, 2002, with the Patriots edging the Steelers 30-14 before 68,756 fans—heralding Foxborough's football renaissance and instantly etching its lighthouse silhouette into NFL lore.
Boasting a thunderous 65,878 capacity on FieldTurf (standard 120x53.3-yard NFL battlefield), Gillette brews bone-crushing intimacy with those iconic end-zone scoreboards and skyline views—dimensions a runner's delight amid 80 luxury suites and 8,000 club seats. Facelifts flared: 2002's initial swell, 2015's $100 million "Project Green" adding social decks and premium lofts, and 2020s' tech tweaks like LED videoboards—blending lighthouse legacy with modern mojo via Kraft stewardship.
Fortress for the New England Patriots since kickoff, Gillette has cradled six Super Bowl triumphs (XXXVI, XXXVIII, XXXIX, XLIX, LI, LIII—all but two home-fueled feasts), 11 AFC Championships, Brady's GOAT quests, and Belichick's brilliance amid 300+ home wins and sellout streaks. Record roars hit 68,756 for 2002's opener, pulsing with "Sweet Caroline" anthems and duck boat parades. Beyond gridiron gold, it hosts concerts and conventions, etching Foxboro's fierce spirit into lore. As Patriots prowl for playoff pulses, Gillette Stadium endures as a lighthouse testament to tenacity, triumphs, and timeless turf in NFL's northeast.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
Wooden Bleacher Seat Pen Blanks!
Pen Blanks are 3/4" x 3/4"
Stopper Blanks are 1 1/2" round
All blanks will come with one COA per blank. COAs are 4" x 6" card stock with silver foil embossed COA seal.
All blanks are cut as they are ordered.
------------------------------------------------------------
Hardin Penworks, LLC, certifies that material supplied to the artisan of the accompanying hand-crafted item was sourced from the wooden bleacher seats of Simon Skjodt Assembly Hall. The hall is a 17,222-seat arena on the campus of Indiana University in Bloomington, IN.
It is the home of the Indiana Hoosiers men's basketball and women's basketball teams. It opened in 1971, replacing the current Gladstein Fieldhouse. The court is named after Branch McCracken, the men's basketball coach who led the school to its first two NCAA National Championships in 1940 and 1953. Basketball sportscaster Gus Johnson called the Assembly Hall "the Carnegie Hall of basketball."
This material is guaranteed to be 100% Authentic.
Blanks are shredded bits of the plastic stadium seats mixed with complementary team-colored resin.
Available Sizes:
- Pen Blanks: Minimum 3/4" x 3/4" square
- Bottle Stopper and Ring Blanks: 1-1/2" round
- Full Pen Blocks: 6" x 5" and a minimum of 7/8" thick
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" minimum
All blanks include one Certificate of Authenticity (COA) per blank—a 4" x 6" card stock with foil-embossed seal, protected in a hard-shell plastic sleeve. Full Pen Blocks come with 10 COAs.
Most blanks are cut to order for freshness. Pen Blocks require a 2-3 week turnaround.
Rangers Rally in the Ravine – Nab Your Globe Life Gem!
Picture cracking a moonshot off the bat with a pen hewn from seats that sizzled with Texas twang at Globe Life Park, or uncorking AL pennant toasts with a stopper surging in royal blue heat. From diamond dazzle rings reliving Beltre's blasts to dugout-durable knives carving Lone Star feasts—each heirloom is lathe-launched from authentic park plastic, roping 2010 World Series wonders into eternal emblems. Rally your row and let the Rangers' wild west swing thunder through every twist!
Globe Life Park in Arlington: Rangers' Texas Treasure of Diamond Dominance
Globe Life Park in Arlington gleams in the heart of North Texas, a retro-modern marvel birthed for the Texas Rangers' ascent from Arlington Stadium's shadows. Conceived in the late 1980s amid ownership changes led by George W. Bush's group, the $191 million showpiece—funded by a 1990 city sales tax hike—broke ground in 1992 and burst open on April 11, 1994, with the Rangers topping the Milwaukee Brewers 4-3 before 43,857 fans—heralding a new era of Lone Star baseball and instantly dubbing it "The Ballpark in Arlington" for its nostalgic nods to Ebbets and Wrigley.
Boasting a cozy 49,170 capacity on lush natural grass (standard 332-foot left, 400 center, 325 right), the park conjures hitter-friendly heat with those iconic arched entryways and Texas limestone facades—fostering fly-ball fireworks amid skyline views. Facelifts flared: 1994's initial swell, 2011's $10 million upper deck reconfiguration for better sightlines, 2014's Globe Life naming rights glow-up, and 2019's $10 million outfield district upgrades—blending classic charm with modern mojo via Rangers' private infusions until the 2020 move to retractable-roofed Globe Life Field next door.
Sanctuary for the Texas Rangers across 26 sun-soaked seasons, Globe Life Park cradled five AL West crowns (1996, 1998, 1999, 2010, 2011), the 2010 World Series triumph (clinched at home vs. Giants), Beltre's 3,000-hit milestone (2015), and All-Star Games in 1995 and 2010 amid 2,000+ home wins and record roars (49,170 sellouts). Pulsing with "Sweet Caroline" echoes and nacho-fueled frenzies, it hosts concerts and conventions too. As Rangers ride retractable rails, Globe Life Park endures as a Texas testament to tenacity, triumphs, and timeless twang in MLB's marquee.
Pro Turning Tips & FAQ: Master Your Stadium Seat Creations
Transform your blanks into showstoppers with these pro-level insights. Our upgraded V2 blanks boast finer shredded plastic for ultra-smooth turning and minimal chip-out— a game-changer over V1. Dial in sharp carbide or HSS tools, crank speeds to 2,000–3,000 RPM, and take feather-light cuts (0.005–0.015 inches) to dodge melting or gummy buildup. Wet-sand from 220 to 2,000 grit, zap pin-holes with thin CA glue, and crown it with Magic Juice polish for that mirror-finish glow. Dive deeper with our guides:
Quick Q&A
-
What's the secret sauce in these blanks?
Authentic shredded stadium seat plastic fused with vibrant team-colored resin—tough, one-of-a-kind material built for the lathe. -
Sizes and perks?
- Pen Blank: 3/4" x 3/4" square
- Bottle Stopper/Ring: 1-1/2" round
- Full Pen Block: 6" x 5" x 7/8" min (10 COAs included!)
- Knife Scale Pair: 2@ 5" x 1-1/2" x 3/8" min
-
Shipping scoop?
2-5 business days standard; Full Blocks take 2-3 weeks. Free Ground Shipping on $200+ orders—otherwise calculated at checkout. Unopened returns? 30 days, no sweat. -
Authenticity locked in?
100%—sourced straight from historic seat removals. Limited edition vibes: Once they're gone from this batch, they're history.
JB Royal GOLD DUST CRYSTAL resin blanks with suspended shredded resin cut-offs from the over-pour of other Alumilite resin blocks. The suspended material is a wild variety of mixes to form a kaleidoscope of colors.
Blank Sizes:
- 5" Long Blank measures a minimum of 3/4" square
- 9" Kitless Blank measures 3/4" round
- 2-1/2" Stopper Blank measures 1-1/2" round
- 5" Call Blank measures 1-1/2" round
You may find this to be opaque. We recommend back painting the blank after drilling. Using different colors for back painting will yield wildly different effects and results.
As with any suspended material blanks, there is the likely hood of tiny bubbles. These bubbles can easily be remedied with CA (cyanoacrylate) glue.
JB Royal GOLD DUST CRYSTAL resin blanks with suspended shredded resin cut-offs from the over-pour of other Alumilite resin blocks. The suspended material is a wild variety of mixes to form a kaleidoscope of colors.
Blank Sizes:
- 5" Long Blank measures a minimum of 3/4" square
- 9" Kitless Blank measures 3/4" round
- 2-1/2" Stopper Blank measures 1-1/2" round
- 5" Call Blank measures 1-1/2" round
You may find this to be opaque. We recommend back painting the blank after drilling. Using different colors for back painting will yield wildly different effects and results.
As with any suspended material blanks, there is the likely hood of tiny bubbles. These bubbles can easily be remedied with CA (cyanoacrylate) glue.
Golden Gate Bridge 1937 Catwalk Redwood Pen Blank
Product Specifications
Blank Sizes: Sierra Clone style – 27/64" diameter tubes
Material: Genuine embedded wood from the original 1937 Golden Gate Bridge construction catwalk, made from ancient California Redwood.
All blanks include a Certificate of Authenticity (COA) with silver foil embossed seal.
Material Story
These exclusive pen blanks are crafted from original wooden catwalk planks used during the construction of the iconic Golden Gate Bridge in 1937. The lumber came from California’s ancient redwood trees, carefully selected for strength to withstand the brutal winds and harsh conditions of the Golden Gate strait.
During construction, workers built a temporary wooden catwalk foot by foot across the mile-wide opening. Once the bridge was completed, these historic catwalk planks were removed and cut into smaller souvenir pieces. We have transformed these authentic fragments into premium embedded wood pen blanks that capture the incredible history and engineering marvel of one of the world’s most famous bridges.
Each blank is a direct piece of American engineering history — solid, unique, and full of character.
The History of the Golden Gate Bridge
The Golden Gate Bridge is one of the most internationally recognized symbols of San Francisco and California. Spanning the Golden Gate strait — the one-mile-wide entrance to San Francisco Bay — the bridge connects the city of San Francisco to Marin County, carrying both U.S. Route 101 and California State Route 1.
Designed by engineer Joseph Strauss and opened to traffic on May 27, 1937, the Golden Gate Bridge was an engineering triumph. At the time of its completion, it was the longest and tallest suspension bridge in the world, with a main span of 4,200 feet and towers rising 746 feet above the water. It was later named one of the Wonders of the Modern World by the American Society of Civil Engineers.
Construction was incredibly challenging due to strong currents, high winds, and thick fog. To allow workers to build the massive suspension cables and roadway, a temporary wooden catwalk was constructed high above the water using lumber from California’s ancient redwood forests. Plank by plank, the catwalk was extended across the strait and secured against the powerful Pacific winds.
Once the bridge was finished, the historic catwalk was dismantled. Pieces of this original construction wood were preserved and sold as souvenirs — now extremely rare. Today, these redwood fragments offer a tangible connection to one of humanity’s greatest architectural achievements and a beloved landmark that continues to inspire millions.
Turning one of these blanks into a pen means carrying a small piece of the Golden Gate Bridge with you — a true icon of American ingenuity, beauty, and strength.

