Products

Fordite Hybrid Resin Pen Blanks

7/8" Square × 6" Minimum Length

Discover the striking beauty of Fordite Hybrid pen blanks — a captivating fusion of authentic Fordite (also known as Detroit Agate or Motor City Agate) embedded in high-quality resin.

Fordite forms from decades of layered automotive overspray paint, baked repeatedly in factories during the era of hand-sprayed vehicles. This creates mesmerizing banded patterns, swirls, and vibrant color gradients that tell a story of industrial history. We take select chunks of this rare material and cast them into durable hybrid blanks using premium resin, resulting in eye-catching, one-of-a-kind pieces with enhanced stability and turnability.

Key Features:

• Dimensions: Approximately 7/8" square × 5" minimum length (slightly oversized for easier turning and trimming).

• Unique Patterns: Every blank features unpredictable layers of vibrant automotive paint suspended in resin — no two are alike.

• Hybrid Construction: Fordite fragments are fully encased in resin for better structural integrity compared to raw Fordite, reducing chipping while preserving the iconic layered look.

• Perfect for Premium Pens: Ideal for Sierra-style, Wall Street, or larger kits like our Broadside Grande. The generous size allows you to showcase more of the beautiful patterns.

Turning Tips for Best Results:

• These hybrids turn more forgivingly than pure Fordite but still benefit from good technique:

• Use sharp carbide tools like our Black Line carbide tools or HSS tools with light cuts at 2,000–3,000 RPM.

• Sand wet from 220 up to 2,000 grit.

• Fill any minor voids with thin CA glue as needed.

• Finish with your favorite CA or Magic Juice polish for a deep, glossy shine that makes the colors pop.

Note: As with all Fordite and hybrid materials, minor variations, voids, or inclusions are part of the charm and history of the material. Blanks are sold as-is and are non-returnable due to their unique nature.

Whether you're crafting a daily carry, a showpiece gift, or adding to your collection of historic relics, these Fordite Hybrid blanks deliver conversation-starting results every time. Limited stock — each one is a true slice of automotive Americana!

Stadium product images will appear here after you select related stadium products and reprocess (requires synced primary_image_src in local catalog).

Fordite Hybrid Resin Pen Blanks

7/8" Square × 6" Minimum Length

Discover the striking beauty of Fordite Hybrid pen blanks — a captivating fusion of authentic Fordite (also known as Detroit Agate or Motor City Agate) embedded in high-quality resin.

Fordite forms from decades of layered automotive overspray paint, baked repeatedly in factories during the era of hand-sprayed vehicles. This creates mesmerizing banded patterns, swirls, and vibrant color gradients that tell a story of industrial history. We take select chunks of this rare material and cast them into durable hybrid blanks using premium resin, resulting in eye-catching, one-of-a-kind pieces with enhanced stability and turnability.

Key Features:

• Dimensions: Approximately 7/8" square × 5" minimum length (slightly oversized for easier turning and trimming).

• Unique Patterns: Every blank features unpredictable layers of vibrant automotive paint suspended in resin — no two are alike.

• Hybrid Construction: Fordite fragments are fully encased in resin for better structural integrity compared to raw Fordite, reducing chipping while preserving the iconic layered look.

• Perfect for Premium Pens: Ideal for Sierra-style, Wall Street, or larger kits like our Broadside Grande. The generous size allows you to showcase more of the beautiful patterns.

Turning Tips for Best Results:

• These hybrids turn more forgivingly than pure Fordite but still benefit from good technique:

• Use sharp carbide tools like our Black Line carbide tools or HSS tools with light cuts at 2,000–3,000 RPM.

• Sand wet from 220 up to 2,000 grit.

• Fill any minor voids with thin CA glue as needed.

• Finish with your favorite CA or Magic Juice polish for a deep, glossy shine that makes the colors pop.

Note: As with all Fordite and hybrid materials, minor variations, voids, or inclusions are part of the charm and history of the material. Blanks are sold as-is and are non-returnable due to their unique nature.

Whether you're crafting a daily carry, a showpiece gift, or adding to your collection of historic relics, these Fordite Hybrid blanks deliver conversation-starting results every time. Limited stock — each one is a true slice of automotive Americana!

Stadium product images will appear here after you select related stadium products and reprocess (requires synced primary_image_src in local catalog).

Fordite Hybrid Resin Pen Blanks

7/8" Square × 6" Minimum Length

Discover the striking beauty of Fordite Hybrid pen blanks — a captivating fusion of authentic Fordite (also known as Detroit Agate or Motor City Agate) embedded in high-quality resin.

Fordite forms from decades of layered automotive overspray paint, baked repeatedly in factories during the era of hand-sprayed vehicles. This creates mesmerizing banded patterns, swirls, and vibrant color gradients that tell a story of industrial history. We take select chunks of this rare material and cast them into durable hybrid blanks using premium resin, resulting in eye-catching, one-of-a-kind pieces with enhanced stability and turnability.

Key Features:

• Dimensions: Approximately 7/8" square × 5" minimum length (slightly oversized for easier turning and trimming).

• Unique Patterns: Every blank features unpredictable layers of vibrant automotive paint suspended in resin — no two are alike.

• Hybrid Construction: Fordite fragments are fully encased in resin for better structural integrity compared to raw Fordite, reducing chipping while preserving the iconic layered look.

• Perfect for Premium Pens: Ideal for Sierra-style, Wall Street, or larger kits like our Broadside Grande. The generous size allows you to showcase more of the beautiful patterns.

Turning Tips for Best Results:

• These hybrids turn more forgivingly than pure Fordite but still benefit from good technique:

• Use sharp carbide tools like our Black Line carbide tools or HSS tools with light cuts at 2,000–3,000 RPM.

• Sand wet from 220 up to 2,000 grit.

• Fill any minor voids with thin CA glue as needed.

• Finish with your favorite CA or Magic Juice polish for a deep, glossy shine that makes the colors pop.

Note: As with all Fordite and hybrid materials, minor variations, voids, or inclusions are part of the charm and history of the material. Blanks are sold as-is and are non-returnable due to their unique nature.

Whether you're crafting a daily carry, a showpiece gift, or adding to your collection of historic relics, these Fordite Hybrid blanks deliver conversation-starting results every time. Limited stock — each one is a true slice of automotive Americana!

Stadium product images will appear here after you select related stadium products and reprocess (requires synced primary_image_src in local catalog).

Fordite Hybrid Resin Pen Blanks

7/8" Square × 6" Minimum Length

Discover the striking beauty of Fordite Hybrid pen blanks — a captivating fusion of authentic Fordite (also known as Detroit Agate or Motor City Agate) embedded in high-quality resin.

Fordite forms from decades of layered automotive overspray paint, baked repeatedly in factories during the era of hand-sprayed vehicles. This creates mesmerizing banded patterns, swirls, and vibrant color gradients that tell a story of industrial history. We take select chunks of this rare material and cast them into durable hybrid blanks using premium resin, resulting in eye-catching, one-of-a-kind pieces with enhanced stability and turnability.

Key Features:

• Dimensions: Approximately 7/8" square × 5" minimum length (slightly oversized for easier turning and trimming).

• Unique Patterns: Every blank features unpredictable layers of vibrant automotive paint suspended in resin — no two are alike.

• Hybrid Construction: Fordite fragments are fully encased in resin for better structural integrity compared to raw Fordite, reducing chipping while preserving the iconic layered look.

• Perfect for Premium Pens: Ideal for Sierra-style, Wall Street, or larger kits like our Broadside Grande. The generous size allows you to showcase more of the beautiful patterns.

Turning Tips for Best Results:

• These hybrids turn more forgivingly than pure Fordite but still benefit from good technique:

• Use sharp carbide tools like our Black Line carbide tools or HSS tools with light cuts at 2,000–3,000 RPM.

• Sand wet from 220 up to 2,000 grit.

• Fill any minor voids with thin CA glue as needed.

• Finish with your favorite CA or Magic Juice polish for a deep, glossy shine that makes the colors pop.

Note: As with all Fordite and hybrid materials, minor variations, voids, or inclusions are part of the charm and history of the material. Blanks are sold as-is and are non-returnable due to their unique nature.

Whether you're crafting a daily carry, a showpiece gift, or adding to your collection of historic relics, these Fordite Hybrid blanks deliver conversation-starting results every time. Limited stock — each one is a true slice of automotive Americana!

Stadium product images will appear here after you select related stadium products and reprocess (requires synced primary_image_src in local catalog).

Wooden Stadium Seats from Spring training season stadium for the New York Yankees and the Baltimore Orioles

Pen Blanks are a minimum of 3/4" x 3/4" 

All blanks will come with one COA per blank. COAs are 4" x 6" card stock with foil embossed COA seal. 

All blanks are cut as they are ordered.

Description to follow

JB Royal GARNET CRYSTAL maroon red resin blanks with suspended shredded resin cut-offs from the over-pour of other Alumilite and JB Royal resin blocks. The suspended material is a wild variety of mixes to form a kaleidoscope of colors.

Blank Sizes:

• 5" Long Blank  measures a minimum of 3/4" square
• 9" Kitless Blank measures 3/4" round
• 2-1/2" Stopper Blank  measures 1-1/2" round
• 5" Call Blank measures 1-1/2" round

You may find this to be opaque. We recommend back painting the blank after drilling. Using different colors for back painting will yield wildly different effects and results.

As with any suspended material blanks, there is the likely hood of tiny bubbles. These bubbles can easily be remedied with CA (cyanoacrylate) glue.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 13.25" x 6.5" x 2.125" with one JUMBO casting chamber measuring 12" x 5.25" 1.2".  Up to THIRTEEN pen blanks 13/16" can be cut from the block and they can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 4" x 2.25" x 2" with one casting chambers, each measuring 2.5" x 1.5" x 1.5".  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  The blanks can easily be end trimmed and squared up on a table saw, if so desired. 

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 6.50" x 4.50" x .1.25" with two casting chambers, each measuring 4.50" x 1.50" x .50".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 7.3125" x 6.70" x 2.00" with one casting chamber measuring 5.25" x 5.00" x 1.21875".  Up to five pen blanks can be cut from the block and they can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 6.50" x 4.50" x .75" with two casting chambers, each measuring 5.5" x 1.50" x .50".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 7.3125" x 6.70" x 2.00" with one casting chamber measuring 6" x 6" x 1".  Up to SIX pen blanks can be cut from the block and they can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

 A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax or Silicone Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

The plugs are replacements for our Maneater line of HDPE molds.

The Large Pentagon Blue Silicone plugs are typically used for the center plugs of our larger molds like the Gator block molds.

The Small Round Blue Silicone plugs are used in the slot plugs of our Dinobone molds and other smaller molds.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 10.5" x. 6.5" x 3.125" tall with FIFTEEN casting chambers, each measuring 2.5" tall x 1.5" round.  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  The blanks can easily be end trimmed and squared up on a table saw, if so desired. 

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 4.5" sq x 3" tall with FOUR casting chambers, each measuring 2.5" tall x 1.5" round.  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  The blanks can easily be end trimmed and squared up on a table saw, if so desired. 

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This model has overall dimensions of 4.5" sq x 3" tall with SIX casting chambers, each measuring 2.5" tall x 1.5" round.  This will deliver blanks perfect for turning bottle stoppers and duck call bodies.  The blanks can easily be end trimmed and squared up on a table saw, if so desired. 

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Gator Mold Replacement Black Mushroom Plugs

Keep your Maneater HDPE casting molds performing at their best with these replacement black mushroom plugs. Designed specifically as direct replacements, the plugs restore proper sealing and alignment in your molds.

Large Plugs

Large plugs are ideal for the corners of most molds and the center positions in larger formats such as Gator block molds. Their robust construction ensures consistent pressure distribution during resin pours.

Small Plugs

Small plugs fit the slot positions in Dinobone molds and the corners of compact molds including Dogbone and Dual Socket Ring styles. They provide precise fitment for detailed pen blank casting.

These silicone plugs offer excellent chemical resistance and repeated-use durability. Pair them with your existing Maneater molds for reliable results every time.