Glow in the Dark Mica Powder for Resin Pen Blanks

Slime Yellow Glow in the Dark Mica Powder for Resin Pen Blanks

Pen turners reach for this vibrant slime yellow glow in the dark mica powder when they want electric color that charges fast and pops under shop lights. The daytime shade is a bold toxic yellow that shifts to bright green once charged, making it ideal for custom pen blanks that stand out on a show table or in a customer’s hand.

Why Pen Turners Choose Maneater Slime Yellow GLOW

• Pen-blank casting favorite: Mixes cleanly into clear Alumilite for thin-wall Sierra and similar styles that glow on the finished barrel.

• 1 g per 1 oz starting dose: Follow the 1:30 ratio for Alumilite so you know exactly how much mica powder per ounce delivers strong color without sinking.

• 30–60 minute visible glow: Brightest right after a 5–15 minute charge under sun, LED, or UV, then softens naturally for realistic shop demos.

• 0.5 oz jar (~14 g): Enough powder for multiple small pen-blank pours at the recommended Alumilite ratio.

• Wide-mouth jar: Makes scooping and precise measuring simple during resin sessions.

• Clear-resin clarity: Performs best in transparent bases so the pastel glow stays bright rather than muddy.

• Pairing potential: Combines with Slime Green or Red Sky for layered biohazard or stadium themes.

Perfect For

• Slime-yellow glow pen blanks turned on Sierra or similar kits from Pen Kits.

• Custom hybrid blanks where makers pour glow resin around burl or segmented wood.

• Show-table pens that charge under display lights and glow during evening sales.

• Bottle stoppers and knife scales that need the same resin workflow as pen blanks.

• Layered casts combining this shade with Violet or Yellow-Green for unique effects.

• Inspiration from finished pieces in the growing Hybrid Blanks collection.

How to Get the Strongest Glow (Mixing Tips)

1. Start with clear or very lightly tinted resin so the slime yellow glow stays vivid.

2. Mix the powder into Part A first, then add Part B and stir slowly to reduce bubbles.

3. Use the pen-blank starting dose of 1 g powder per 1 oz resin by weight for Alumilite; increase gradually for stronger color.

4. Charge finished blanks 5–15 minutes under sunlight, LED, or UV light before testing glow.

5. Important: This is a casting pigment only and is not intended for stabilizing resin or wood.

Recommended Mix Ratios & Tips for Best Results

Pen turners casting their own blanks need reliable ratios that keep powder suspended and glow bright. Always begin with clear resin bases. The table below shows the exact starting ratios tested with this slime yellow glow in the dark mica powder.

Begin at the Alumilite 1:30 ratio for most pen blanks. Epoxy and polyester rows use their own units. Stir slowly and avoid over-pigmentation that can reduce glow intensity.

Pro Tip: brightest glow comes from clear resin, moderate pigment load per the table, and a quick 30–60 second UV or sunlight charge after demolding.

Ready to cast your next glowing pen blank? Pair this Maneater Glow powder with Pen Essentials, HDPE Molds, and Resin casting supplies. Explore more options in Mica Powder or the full Maneater line.

Maneater Slime Green Glow Mica Powder for Resin – Slime Green (0.5 oz)

Pen turners seeking maximum visual impact reach for Maneater Slime Green glow mica powder for resin. In daylight the powder produces a vivid neon slime green that shifts to a bright radioactive glow once charged. Cast into custom pen blanks and the color stays intense through turning and polishing, giving finished barrels a striking daytime look that transforms under low light at shows or demos.

Why Pen Turners Choose Maneater Slime Green GLOW

• Pen-blank performance: Mixes cleanly into Alumilite, JB Royal Original, and JB Royal Thin without clumping, producing clear, high-contrast glow on turned barrels.

• Starting ratio for pens: Use the table ratio of 1:30 Grams : Grams in Alumilite (≈ 1 g powder per 1 oz resin) for reliable results across multiple blanks.

• Visible glow duration: After a 5–15 minute charge the brightest glow lasts 30–60 minutes before softening gradually—perfect for shop demos and evening sales tables.

• 0.5 oz jar yield: The 0.5 oz jar (~14 g) supports many pen-blank pours when following the Alumilite starting ratio.

• Wide-mouth jar: Easy scooping and precise measuring for consistent batches.

• Resin compatibility: Works equally well in JB Royal Thin and polyester systems for hybrid or solid casts.

• Show appeal: Slime green glow stands out under blacklight, helping Pen Blanks sell faster at events.

Perfect For

• Slime-green stadium glow pen blanks that charge quickly for evening demos.

• Custom Sierra and kit pens paired with Pen Kits for complete builds.

• Hybrid pen blanks poured around wood or segmented material—see finished examples in Hybrid Blanks.

• Bottle stoppers and knife scales needing the same resin workflow and glow effect.

• Biohazard or sci-fi themed turning projects that benefit from intense neon color.

• Additional resin casting supplies available in Resin casting supplies.

How to Get the Strongest Glow (Mixing Tips)

1. Use clear or very lightly tinted resin so the slime green glow shines through.

2. Mix powder into Part A first, then add Part B and stir slowly to avoid bubbles.

3. Follow the pen-blank starting dose in the table below; increase gradually for stronger color.

4. Charge finished blanks 5–15 minutes under sunlight, LED, or UV light.

5. Important: This is a casting pigment only—NOT for stabilizing resin/wood. Pair with HDPE Molds for best results.

Recommended Mix Ratios & Tips for Best Results

Clear resin bases give the brightest slime green glow. Start with the conservative ratios shown and adjust upward only after testing a small batch. Stir gently and avoid over-pigmentation that can reduce translucency in thin pen walls.

Pro Tip: The brightest glow on finished pens comes from clear resin, moderate pigment load per the table, and a short 30–60 second UV or sunlight charge before final assembly with Pen Essentials.

Explore the full Maneater Glow line or the broader Mica Powder selection and Maneater range for complementary colors that pair perfectly with slime green accents.

Orange-Red Glow in the Dark Mica Powder for Resin – Maneater Series (0.5 oz)

Pen turners casting their own Pen Blanks reach for Maneater Orange-Red when they want a fiery daytime shimmer that erupts into a bright glow once charged. This Maneater Glow pigment pairs rich orange-red mica with photoluminescent particles so your finished barrel shows intense color under shop lights and a vivid glow when the lights drop.

Why Pen Turners Choose Maneater Orange-Red GLOW

• Pen-blank casting focus: Designed for Sierra, Slimline, and custom Pen Blanks that makers turn and sell at shows.

• Realistic glow performance: After a 5–15 minute charge the brightest glow lasts 30–60 minutes, then softens gradually—perfect for demo tables and evening displays.

• Alumilite 1:30 starting ratio: Begin with 1 g powder per 1 oz resin by weight; increase slightly for stronger color and glow on thin-wall pens.

• Ultra-fine 10-60 micron particles: Disperses evenly in clear resin with minimal stirring, keeping your cast blank free of streaks or clumps.

• 0.5 oz jar (14 g): Enough powder for roughly fourteen standard pen-blank pours at the Alumilite 1:30 ratio.

• Wide-mouth jar: Makes precise scooping simple so you measure exactly what each pour needs.

• Non-toxic and skin-safe: CPSIA compliant, vegan, and cruelty-free for worry-free handling during turning and finishing.

• Compatible with: Alumilite, JB Royal Original, and JB Royal Thin

Perfect For

• Stadium glow pen blanks that charge under UV and glow like embers at night markets.

• Custom Hybrid Blanks where you pour orange-red glow resin around burl or segmented wood.

• Safety-orange hunter or rescue themed Pen Kits that stand out on a display table.

• Knife scales and bottle stoppers that share the same resin workflow as pen blanks.

• Pairing with Pen Essentials and Resin casting supplies for complete turning projects.

How to Get the Strongest Glow (Mixing Tips)

1. Use crystal-clear or very lightly tinted resin so the orange-red color and glow stay vivid.

2. Mix the powder into Part A first, then add Part B and stir slowly to avoid bubbles.

3. Start at the Alumilite 1:30 g:g ratio—approximately 1 g powder per 1 oz resin by weight—and increase gradually for stronger effect.

4. Charge finished blanks 5–15 minutes under sunlight, LED, or UV light before showing the glow.

5. Important: casting pigment only—NOT for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Clear resin gives the brightest results with Maneater Orange-Red. Always follow the table below for starting doses and adjust upward only after testing a small pour. Stir gently and use a pressure pot when casting epoxy or polyester to keep blanks bubble-free.

Pro Tip: The clearest resin plus the moderate pigment load shown in the table, followed by a 30–60 second UV or sunlight charge, produces the brightest glow on a finished turned pen.

Explore the full Maneater line or browse Mica Powder options to build your next set of glow blanks. Pair this color with HDPE Molds, Alumilite, JB Royal Original, or JB Royal Thin for consistent results every time.

Violet Glow in the Dark Mica Powder for Resin – Maneater Violet (0.5 oz)

Pen turners seeking a delicate lavender-violet daytime shimmer that transforms into a gentle purple glow choose this Maneater Glow powder. Cast it into Pen Blanks for elegant galaxy or pastel themes that stand out under shop lights and glow softly after charging. The 0.5 oz jar supplies enough for multiple custom projects when following the ratio table below.

Why Pen Turners Choose Maneater Violet GLOW

• Soft pastel violet tone shifts to elegant purple glow, ideal for feminine or layered pen designs.

• Pen-blank starting dose follows the Alumilite 1:30 Grams : Grams ratio (≈ 1 g powder per 1 oz resin by weight) for consistent results without sinking.

• Visible glow lasts 30–60 minutes at peak brightness after a 5–15 minute charge under sunlight, LED, or UV, then softens gradually for realistic shop demos.

• 0.5 oz jar (~14 g) yields many pen-blank pours at the Alumilite starting ratio.

• Wide-mouth jar allows easy, precise scooping for accurate measuring every time.

• Clean mix in clear resins pairs beautifully with Mica Powder accents for depth in hybrid pours.

• Compatible with Alumilite, JB Royal Original, and JB Royal Thin resins while preserving the soft violet character.

Perfect For

• Galaxy-style Pen Blanks with subtle violet glow accents.

• Pastel gift pens and Sierra-style casts that glow gently at night markets.

• Layered knife scales or bottle stoppers where a feminine purple tone is desired.

• Custom wood-and-glow-resin Hybrid Blanks makers pour themselves around burl or segmented wood.

• Thin-wall clarity projects that benefit from low pigment loads for translucent effects.

• Broader resin craft accents such as small castings when pen work is complete.

How to Get the Strongest Glow (Mixing Tips)

1. Start with clear or very lightly tinted resin so the pastel glow remains visible.

2. Mix powder into Part A first, then add Part B and stir slowly to reduce bubbles.

3. Use the pen-blank starting point of Alumilite 1:30 Grams : Grams (≈ 1 g powder per 1 oz resin by weight); increase gradually only if stronger intensity is needed.

4. Charge finished pieces 5–15 minutes under sun, LED, or UV light.

5. Important: this is a casting pigment only and is not intended for stabilizing resin or wood.

Recommended Mix Ratios & Tips for Best Results

Clear resin bases deliver the brightest results with this violet powder. Begin light to maintain translucency, then adjust upward for more opaque intensity while staying within the table guidelines. Stir slowly after adding Part B to keep bubbles minimal and powder suspended.

Pen turners casting Pen Blanks or exploring Hybrid Blanks inspiration will find the Alumilite row especially useful for fast cures that lock the pigment in place. Epoxy and polyester users follow their respective rows for best clarity and color payoff.

Pro Tip: For the brightest glow on turned pen barrels, use clear resin, keep pigment load moderate per the table, and give the piece a quick 30–60 second charge under UV or sunlight before showing at events. Pair this powder with Pen Kits, Pen Essentials, and HDPE Molds for complete projects, then explore the full Maneater Glow line or Resin casting supplies for more options.

Red Sky Glow in the Dark Mica Powder for Resin – Maneater Red Sky (0.5 oz)

Pen turners seeking a bold crimson daytime hue that transforms into vivid glowing red on finished barrels reach for Maneater Casting GLOW Powder in Red Sky. This 0.5 oz jar delivers a deep red shimmer under shop lights that charges to intense crimson glow, making it ideal for custom Pen Blanks and stadium-style turning projects.

Why Pen Turners Choose Maneater Red Sky GLOW

• Pen-blank ready dose – Start at the table ratio of 1:30 Grams : Grams for Alumilite so each ounce of resin receives about 1 g of powder.

• Visible glow window – After a 5–15 minute charge the crimson glow stays brightest for 30–60 minutes, then softens gradually for show-table demos.

• 0.5 oz jar yield – Approximately 14 g of powder supports multiple pen-blank pours when following the Alumilite starting ratio.

• Wide-mouth jar – Easy scooping and precise measuring without spills during mixing sessions.

• Clear-resin clarity – Particles stay suspended in fast-cure urethanes, producing translucent red that glows cleanly on turned barrels.

• Kit compatibility – Pairs naturally with Pen Kits and Pen Essentials for complete custom builds.

Perfect For

• Stadium glow pen blanks that charge under arena lights then glow during evening shows.

• Galaxy-style resin barrels where Red Sky creates dramatic crimson accents against darker woods.

• Custom wood-and-glow-resin hybrid pen blanks poured by makers exploring Hybrid Blanks for inspiration.

• Bold bottle stoppers and knife scales that need strong red daytime color plus reliable glow.

• Thin-wall casts where the 1:30 Alumilite ratio keeps clarity while delivering visible glow on the finished pen.

How to Get the Strongest Glow (Mixing Tips)

1. Use clear or very lightly tinted resin so the red glow shines through.

2. Mix powder into Part A first, then add Part B and stir slowly to avoid bubbles.

3. Follow the pen-blank starting dose of 1:30 Grams : Grams for Alumilite (≈ 1 g powder per 1 oz resin by weight); increase gradually for stronger color.

4. Charge finished blanks 5–15 minutes under sunlight, LED, or UV light.

5. Important: casting pigment only — NOT for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Clear resin lets the vivid crimson glow read strongest on turned pen barrels. Always mix powder into Part A before adding Part B. Pen turners casting Alumilite blanks begin at the 1:30 Grams : Grams ratio listed below and adjust upward only after testing a single blank. Epoxy and polyester users follow their own rows for best clarity and minimal sinking.

Pro Tip: For the brightest glow on a finished pen, choose clear resin, stay near the table starting ratios, and give the blank a quick 30–60 second charge under UV or sunlight before your next turning session. Explore more colors in the Maneater Glow line or restock Resin casting supplies and HDPE Molds to keep your workflow moving.

Blue Sky Glow in the Dark Mica Powder for Resin – Maneater Blue Sky (0.5 oz)

Pen turners casting their own Pen Blanks reach for Maneater Blue Sky when they want a delicate daytime pastel that transforms into a gentle sky-blue glow on the finished barrel. This Maneater Glow pigment shines in stadium-style and hybrid pours where the soft color pairs beautifully with light wood tones or clear resin layers.

Why Pen Turners Choose Maneater Blue Sky GLOW

• Soft pastel shimmer by day – Delicate baby-blue tone that stays subtle on turned Pen Blanks under shop lights.

• Gentle sky-blue glow at night – Visible glow lasts 30–60 minutes after charging, brightest early then softens naturally for show-table demos.

• Ultra-fine particles – Blends evenly in clear resin without clumping or settling issues common in thicker glow powders.

• Pen-blank starting dose – Use Alumilite at 1:30 Grams : Grams (≈ 1 g powder per 1 oz resin by weight) for balanced color and glow; see full table below.

• 0.5 oz jar (~14 g) – Supplies multiple Pen Blanks at the recommended ratio.

• Wide-mouth jar design – Makes precise scooping simple when measuring for small epoxy resin pours.

• Compatible with hybrid workflows – Perfect for custom wood-and-resin Hybrid Blanks that combine glow resin with burl or segmented stock.

• Compatible Resins: Alumilite, JB Royal Original, and JB Royal Thin

Perfect For

• Soft pastel glow Pen Blanks paired with Pen Kits for nursery or ocean-themed pens.

• Stadium-style casts where the gentle glow shows on thin barrel walls under low light.

• Custom Hybrid Blanks poured around light woods for one-of-a-kind turning stock.

• Subtle glow Pen Essentials and stoppers that sell well at craft shows.

• Light epoxy resin layers in bottle stoppers or knife scales that share the same casting workflow.

How to Get the Strongest Glow (Mixing Tips)

1. Start with clear or very lightly tinted resin so the soft pastel color reads true on your Pen Blanks.

2. Mix the powder into Part A first, then add Part B for even distribution.

3. Pen-blank starting point: Alumilite 1:30 Grams : Grams (≈ 1 g powder per 1 oz resin by weight). Increase gradually for stronger color and glow. Epoxy and polyester ratios appear in the table below.

4. Charge 5–15 minutes under sunlight, LED, UV lamp, or phone flashlight.

5. Works in epoxy, urethane, and UV resin systems.

Important: This is a casting pigment and is NOT for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Clear resin bases give the brightest glow on turned Pen Blanks. Stir slowly to avoid bubbles when working with Resin casting supplies. Pastel shades like Blue Sky perform best at lighter loads so the daytime color stays delicate.

Charge the finished blank under any strong light source for reliable 30–60 minute visibility during demos. Makers who pour their own Hybrid Blanks often combine this powder with light woods for soft day-to-night contrast.

Pro tip: The clearest resin plus moderate pigment load per the table above delivers the brightest 30–60 minute glow on finished Pen Blanks. Pair this jar with HDPE Molds and Alumilite for consistent results, then finish with Pen Kits. Explore more shades in the Maneater Glow line or Maneater collection.

Maneater Casting Glow in the Dark Mica Powder for Resin – Purple (0.5 oz)

Rich violet daytime color shifts to a deep purple glow once charged, making it a favorite among pen turners casting custom Pen Blanks. The shade suits galaxy themes, fantasy barrels, and dramatic night-time effects on finished pens turned from your own resin casts.

Why Pen Turners Choose Maneater Purple GLOW

• Pen-blank casting favorite – delivers bold violet that glows deep purple on turned barrels under shop lights or in the dark.

• Alumilite starting ratio – use 1:30 Grams : Grams (≈ 1 g powder per 1 oz resin by weight) for consistent suspension in clear urethane.

• Visible glow duration – brightest for 30–60 minutes after a 5–15 minute charge under sun, LED, or flashlight, then softens gradually.

• 0.5 oz jar (~14 g) – supplies many pen-blank pours at the table ratio when each pour uses roughly 1 oz resin.

• Wide-mouth jar – makes precise scooping and measuring simple between projects.

• Clean mix in multiple resins – works with Alumilite, JB Royal Original, and JB Royal Thin for reliable results.

• Particle behavior – fine powder stays suspended well in fast-cure urethanes with minimal sinking.

Perfect For

• Galaxy and fantasy Pen Blanks that glow on the finished barrel.

• Amethyst-inspired custom pens paired with Pen Kits from the Pen Essentials collection.

• Stadium-style glow pens for show tables and night demos.

• Custom wood-and-glow-resin Hybrid Blanks you pour yourself around burl or segmented wood.

• Glowing knife scales and bottle stoppers in matching violet tones.

• Other turner’s castings such as resin art accents.

How to Get the Strongest Glow (Mixing Tips)

1. Use clear or very lightly tinted resin so the violet glow shines through.

2. Mix powder into Part A first, then add Part B and stir slowly to avoid bubbles.

3. Pen-blank starting point: Alumilite 1:30 Grams : Grams (≈ 1 g per 1 oz resin by weight); increase gradually for stronger color.

4. Charge 5–15 minutes under sun, LED/UV, or phone flashlight for maximum brightness.

5. Important: casting pigment only – NOT for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Use clear or very lightly tinted resin to let the violet glow shine. Mix powder into Part A first, then add Part B. Start conservative at the table ratios below and increase for stronger color. Charge 5–15 minutes under sun, LED/UV, or phone flashlight for maximum brightness.

Pen turners casting Pen Blanks achieve reliable results with the Alumilite row. Makers exploring Hybrid Blanks can pour glow resin around wood segments for unique turning stock. Always stir slowly and consider a pressure pot for bubble-free epoxy or polyester casts.

Pro Tip: brightest glow comes from clear resin, moderate pigment load per the table, and a 30–60 second UV or sun charge. Explore more shades in the Maneater Glow line or browse Mica Powder and Resin casting supplies. Pair this powder with HDPE Molds and finish your blanks with Pen Kits.

Maneater Casting GLOW Powder – Yellow-Green (0.5 oz)

Chartreuse daytime color shifts to a powerful lime glow once charged, making this Maneater Glow pigment a favorite among pen turners who cast their own Pen Blanks. The bright yellow-green hue reads toxic and alien under shop lights, then delivers standout visibility after a quick charge when the finished barrel hits low light at shows or demos.

Why Pen Turners Choose Maneater Yellow-Green GLOW

• Intense lime glow on turned barrels – Pen turners report the color pops dramatically once charged, perfect for stadium or safety-themed Pen Kits.

• Pen-blank starting dose – Follow the table below: Alumilite at 1:30 Grams : Grams (≈ 1 g powder per 1 oz resin by weight) for reliable results without sinking.

• Visible glow 30–60 minutes – Brightest right after a 5–15 minute charge under sun, LED, or UV; glow softens gradually for realistic shop and show performance.

• Clean mix in clear resins – Works smoothly with Alumilite, JB Royal Original, and JB Royal Thin without clumping.

• 0.5 oz jar (~14 g) – Supplies multiple pen-blank pours at the Alumilite starting ratio listed in the table.

• Wide-mouth jar design – Makes precise scooping and measuring simple during resin prep.

• Particle behavior – Fine pigment stays suspended in fast-cure urethanes, giving even glow distribution through thin pen walls.

Perfect For

• Toxic-waste and alien-themed Pen Blanks that glow at night markets.

• High-visibility hunter or safety-orange hybrid pens paired with Pen Essentials.

• Custom wood-and-glow-resin hybrid pen blanks poured around burl or segmented stock; see finished examples in the Hybrid Blanks collection.

• Glowing knife scales and bottle stoppers that match the same resin workflow.

• Show-table demos where charged pen barrels need quick, bright visibility.

• Broader resin casting projects when makers want reliable glow performance.

How to Get the Strongest Glow (Mixing Tips)

1. Start with clear or very lightly tinted resin so the lime glow can shine through.

2. Mix powder into Part A first, then add Part B and stir slowly to avoid bubbles.

3. Use the pen-blank starting dose from the table: Alumilite 1:30 Grams : Grams (≈ 1 g per 1 oz resin by weight); increase gradually for stronger intensity.

4. Charge finished pieces 5–15 minutes under sunlight, LED, or UV light.

5. Important: casting pigment only – NOT for stabilizing resin or wood.

Recommended Mix Ratios & Tips for Best Results

Use clear or very lightly tinted resin to let the lime glow shine. Mix powder into Part A first, then add Part B. Start at the ratios shown in the table and increase gradually for stronger glow. Charge 5–15 minutes under sunlight, LED, or UV light. This is casting pigment only – not for stabilizing resin or wood.

Pen turners casting Pen Blanks should reference the Alumilite row first. Makers exploring Hybrid Blanks can pour this pigment around wood segments for unique glow effects. Pair finished casts with Pen Kits and HDPE Molds for clean results. Explore the full Maneater line and Mica Powder options in Resin casting supplies.

Pro Tip: For the brightest glow, choose clear resin, keep pigment load light per the table, and give the finished piece a 30–60 second UV or sunlight charge before turning or showing.

Ready to cast intense lime glow into your next Pen Blanks project? Add this Mica Powder to your cart today.

Maneater Pink-Orange Glow in the Dark Mica Powder for Pen Blanks (0.5 oz)

Pen turners seeking vibrant color-shifting effects turn to Maneater Pink-Orange glow in the dark mica powder for pen blanks. In daylight this pigment delivers a lively coral-pink shimmer that transforms into a warm orange glow once charged. The result is eye-catching tropical sunset or coral reef themes on finished turned barrels that stand out at shows or under shop lights.

Why Pen Turners Choose Maneater Pink-Orange GLOW

• Pen-blank ready intensity — One of the brightest pink-to-orange color-shifting options for custom Pen Blanks that glow after a quick charge.

• Alumilite 1:30 ratio — Start at 1 g powder per 30 g resin by weight for even distribution and strong glow on thin-wall barrels.

• Visible glow duration — Brightest for the first 30–60 minutes after charging, then softens gradually for realistic shop demos.

• Super-fine mica base — Mixes smoothly in clear resins without clumping or settling, ideal for layered Hybrid Blanks.

• 0.5 oz jar (~14 g) — Enough powder for multiple pen-blank pours at the recommended starting ratio.

• Wide-mouth jar — Makes precise scooping easy and mess-free during measuring.

• Resin compatibility — Works with Alumilite, JB Royal Original, JB Royal Thin and most clear epoxies.

Perfect For

• Tropical sunset or coral reef Pen Blanks paired with teal or silver micas.

• Bioluminescent beach or ocean-themed barrels turned on Pen Kits.

• Custom wood-and-glow-resin hybrid pen blanks, stoppers or scales poured by the maker — see inspiration in the Hybrid Blanks collection.

• Glow fishing-lure embeds or night-sky river-table accents that share the same resin workflow.

• Halloween or fantasy knife scales and bottle openers for turners.

How to Get the Strongest Glow (Mixing Tips)

1. Use clear or very lightly tinted resin so darker bases do not overpower the pastel coral-pink daytime color.

2. Mix the powder into Part A first for even distribution, then add Part B.

3. Pen-blank starting dose follows the ratio table below: Alumilite at 1:30 g:g (≈ 1 g powder per 1 oz resin by weight). Increase gradually for stronger color or glow.

4. Charge finished blanks 5–15 minutes under sunlight, LED, UV or a phone flashlight.

5. Works in epoxy, urethane and UV resin systems.

Important: This is a casting pigment and is NOT designed for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Pen turners achieve the brightest results by keeping resin clear and following the authoritative ratios below. Always stir slowly to avoid bubbles and use a pressure pot when casting larger pieces.

Start with the Alumilite 1:30 ratio for most Pen Blanks. Epoxy users begin at the lighter 1:10 end and adjust for desired opacity. Charge the finished blank 30–60 seconds under direct sun or strong UV for maximum initial brightness.

Pro Tip: For the absolute brightest glow on turned pens, stay within the table ratios, use clear resin, and give the blank a 30–60 second UV or sunlight charge right before a show-table demo.

Ready to cast your next glowing barrel? Pair this pigment with Pen Kits and Pen Essentials or explore the full Maneater Glow line.

Orange-Yellow Glow in the Dark Mica Powder for Resin – Maneater Orange-Yellow (0.5 oz)

Pen turners casting their own Pen Blanks reach for Maneater Orange-Yellow glow powder when they need bold daytime safety orange that shifts to intense yellow-orange once charged. This Maneater Glow pigment mixes cleanly into clear resins and produces reliable glow on finished barrels that stand out at shows or on a nightstand.

Why Pen Turners Choose Maneater Orange-Yellow GLOW

• Pen-blank casting performance – Starts at the table ratio of 1:30 grams to grams in Alumilite so one 0.5 oz jar yields many Pen Blanks.

• 30-60 minute visible glow – Brightest right after a 5–15 minute charge under sun, LED or UV, then softens gradually for realistic shop demos.

• Wide-mouth 0.5 oz jar – Easy scooping for precise measuring without waste.

• Ultra-fine mica base – Disperses smoothly in slow-cure resins with minimal settling.

• Epoxy and urethane compatible – Works with JB Royal Thin, JB Royal Original and Alumilite.

• High-visibility safety theme – Perfect for construction, hunter or Halloween Pen Kits that sell fast.

Perfect For

• Safety-orange Pen Blanks that glow on turned barrels.

• Traffic-cone or construction themed pens paired with Pen Kits.

• Custom wood-and-glow-resin hybrid blanks poured around burls or segmented wood – see finished examples in Hybrid Blanks.

• Glowing knife scales and bottle stoppers using the same 1:30 Alumilite ratio.

• Emergency-services tribute pens that catch the eye day or night.

How to Get the Strongest Glow (Mixing Tips)

1. Use clear or very lightly tinted resin so the orange color and glow shine through.

2. Stir powder into Part A first, then add Part B for even dispersion.

3. Pen-blank starting dose follows the ratio table: Alumilite 1:30 grams to grams (≈ 1 g powder per 1 oz resin by weight).

4. Charge casts 5–15 minutes under sunlight, LED or UV for peak brightness.

5. Important: casting pigment only – NOT for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Clear resin lets the bold orange daytime color and charged glow read strongest on finished Pen Blanks. Mix powder into Part A before adding Part B. Start with the Alumilite 1:30 ratio for pen blanks and increase slightly only if deeper color is needed. Charge 5–15 minutes for reliable 30–60 minute visible glow. Resin casting supplies and HDPE Molds keep pours consistent.

Pro Tip: The brightest glow on a turned pen comes from clear resin, moderate pigment load per the table, and a quick 30–60 second UV or sunlight charge before the blank goes on the lathe.

Explore the full Maneater line and pair this color with Pen Essentials or Mica Powder for your next project.

Mica Powder for Resin – Maneater Aqua Glow in the Dark (0.5 oz)

Pen turners seeking vibrant Pen Blanks reach for Maneater Aqua glow in the dark mica powder. This mica powder for resin delivers a subtle pearlescent aqua shimmer by day that transforms into a bright turquoise glow once charged. Cast it into custom Sierra-style or acrylic-alternative blanks and watch the color pop under shop lights or at shows when the lights drop.

Why Pen Turners Choose Maneater Aqua GLOW

• Pen-blank ready glow – Casts cleanly into thin-wall barrels that show intense aqua color in daylight and a vivid turquoise glow after charging.

• Alumilite 1:30 ratio – Start at the table-recommended 1 g powder per 30 g resin for consistent results across dozens of Pen Blanks.

• 30–60 minute visible glow – Brightest in the first half-hour after a 5–15 minute charge under sun, LED or UV; glow softens gradually afterward.

• Super-fine mica base – Suspends evenly in clear urethanes and epoxies without clumping or settling.

• 0.5 oz jar (~14 g) – Enough powder for many pen-blank pours at the starting ratio.

• Wide-mouth jar – Makes precise scooping simple and mess-free during measuring.

• Compatible with Alumilite, JB Royal Original and JB Royal Thin – Works in urethanes, epoxies and polyesters listed in the ratio table.

Perfect For

• Mermaid-tail and ocean-swirl Pen Blanks that glow at night markets.

• Galaxy or bioluminescent barrel designs paired with Pen Kits.

• Custom wood-and-glow-resin hybrid blanks poured around burls or segmented wood – see inspiration in the growing Hybrid Blanks collection.

• Knife scales and bottle stoppers that need the same resin workflow.

• Layered effects when combined with other Maneater Glow colors.

How to Get the Strongest Glow (Mixing Tips)

1. Use clear or very lightly tinted resin so darker bases do not overpower the pastel aqua.

2. Mix powder into Part A first, then add Part B.

3. Pen-blank starting dose follows the ratio table: Alumilite 1:30 g:g (≈ 1 g powder per 1 oz resin by weight). Increase gradually for stronger color.

4. Charge finished blanks 5–15 minutes under sunlight, LED or UV flashlight.

5. Important: This is a casting pigment only – NOT for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Clear resin gives the brightest glow. Stir slowly to avoid bubbles. Follow the table below for every resin type you pour.

Pro Tip: For the absolute brightest glow on a finished pen, use clear resin, stay at the table’s starting ratios, and give the blank a 30–60 second direct sun or UV charge before your next demo.

Ready to cast glowing Pen Blanks? Pair this aqua powder with HDPE Molds, Resin casting supplies and Pen Essentials. Explore the full Maneater line and Mica Powder options to build your next project.

Blue Glow in the Dark Mica Powder for Resin – Maneater Blue (0.5 oz)

Pen turners casting custom Pen Blanks reach for Maneater blue glow in the dark mica powder to create barrels that shift from rich royal blue shimmer in daylight to a vivid electric blue glow once charged. This 0.5 oz jar supplies the pigment load needed for Sierra-style and stadium glow pens that stand out at shows and in low-light demos.

Why Pen Turners Choose Maneater Blue GLOW

• Pen-blank optimized dose – Start at the Alumilite 1:30 g:g ratio (≈ 1 g powder per 1 oz resin) for consistent suspension and strong glow on turned barrels.
• 30–60 minute visible glow – After a 5–15 minute charge under sun, LED, or flashlight the brightest output lasts 30–60 minutes before softening gradually.
• 0.5 oz jar (~14 g) – Enough pigment for multiple pen-blank pours when following the table ratios.
• Wide-mouth jar – Makes precise scooping simple without spills during measuring.
• Ultra-fine particles – Blend smoothly into Alumilite, JB Royal Original, or JB Royal Thin without clumping or sinking.
• Clear-resin compatible – Keeps the pastel blue glow vibrant instead of being muted by dark tints.

Perfect For

• Stadium glow pen blanks that charge under shop lights and glow during evening shows.
• Galaxy-effect barrels paired with Pen Kits for finished custom pens.
• Hybrid wood-and-resin pours where makers embed burl or segmented stock in blue glow resin.
• Hybrid Blanks inspiration for one-of-a-kind turning stock.
• Bottle stoppers and knife scales that need the same resin workflow as pen blanks.
• Accent pours in river tables or coasters when a blue glow highlight is desired.

How to Get the Strongest Glow (Mixing Tips)

1. Use clear or very lightly tinted resin so the blue glow stays vibrant.
2. Mix powder into Part A first, then add Part B and stir slowly to avoid bubbles.
3. Pen-blank starting point: Alumilite 1:30 g:g (≈ 1 g powder per 1 oz resin by weight). Increase gradually for stronger intensity.
4. Charge 5–15 minutes under sunlight, LED/UV, or phone flashlight.
5. Important: casting pigment only — NOT for stabilizing resin/wood.

Recommended Mix Ratios & Tips for Best Results

Clear resin bases deliver the brightest blue daytime shimmer and the strongest charged glow. Always mix the powder into Part A before adding Part B. For pen blanks the Alumilite 1:30 g:g ratio keeps particles suspended during the fast cure. Epoxy and polyester rows use their own units; start light and test on scrap before committing to a full blank.

Charge the finished blank 5–15 minutes for reliable 30–60 minute glow performance. The table below is the single source of truth for all dosing decisions.

Pro Tip: For the brightest glow on a finished pen, choose clear resin, stay at or below the table starting ratios, and give the cast a quick 30–60 second UV or sunlight charge before turning.