Maneater Crafts Products

Set of 6 silicone inserts for the "DINOBONE - MINI COMBO CASTING SYSTEM".  These inserts fit chambers measuring 4.50" x .75" x 1.0".

The stoppers will accommodate tubes 7mm - 27/64" in diameter.  

Single Pair of silicone inserts for the "DINOBONE - MINI COMBO CASTING SYSTEM".  These inserts fit chambers measuring 4.50" x .75" x 1.0".

The stoppers will accommodate tubes 7mm - 27/64" in diameter.  

Description:

Upgrade your resin casting setup with our innovative 2.5 Gallon Mold Rack System, engineered for safe and efficient curing of multiple silicone casting molds in a standard pressure pot. Unlike traditional interlocking designs, our system features adjustable shelves that lock securely in place using screws and barrel nuts, eliminating the risk of slippage or misalignment. Sturdy 3D printed supports provide exceptional stability, while the integrated 3D printed handle on top makes it easy to insert, remove, and transport the rack.

Each shelf can hold up to four slot DinoBone molds (depending on size), and the adjustable design allows you to customize the height between levels for molds of varying dimensions. Say goodbye to warping issues reported with other products—our reinforced construction ensures consistent performance over time. Ideal for hobbyists, pen turners, and professional casters looking to maximize space, save time, and boost productivity.

This base system includes the essentials to get started: the base and one shelf. Expand your setup with optional additional shelves for multi-tier configurations. Perfect for use in resin casting projects, such as pen blanks, jewelry, and custom molds.

Key Features

• Secure Locking Mechanism: Shelves fasten with screws and barrel nuts for a rock-solid fit, preventing accidental unlocking or tipping.
• Adjustable Shelves: Customize shelf heights to accommodate different mold sizes, offering flexibility not found in fixed interlocking systems.
• Anti-Warp Design: 3D printed supports and high-quality materials resist warping, ensuring long-term reliability.
• Easy Handling: Built-in 3D printed top handle with finger grips for safe and convenient carrying.
• Stackable and Expandable: Start with the base + one shelf; add more shelves as needed for up to multiple tiers (capacity depends on pot height).
• Space-Efficient: Maximizes vertical space in your 2.5 gallon pressure pot without touching or disturbing curing molds.
• User-Friendly Assembly: Simple instructions included; assemble in minutes with provided hardware.

Product Specs

• Designed to fit standard 2.5 gallon pressure pots, including Harbor Freight models.
• Rack dimensions: 8.5” diameter and 8.25” height for optimal compatibility.
• Material: High-quality, durable components with 3D printed supports and handle to prevent warping and ensure longevity.
• Includes: Base, one adjustable shelf, sturdy 3D printed supports, 3D printed top handle, screws, and barrel nuts for secure assembly.
• Additional shelves available for purchase to expand capacity.

Why Choose Our Mold Rack System?

Tired of flimsy racks that warp or fail under pressure? Our system addresses common complaints with competitors’ products by incorporating adjustable, lockable shelves and robust 3D printed elements. Whether you’re casting pen blanks at StadiumPenBlanks.com or tackling larger projects, this rack delivers professional-grade performance at an affordable price.

Description:

Upgrade your resin casting setup with our innovative 5 Gallon Mold Rack System, engineered for safe and efficient curing of multiple silicone casting molds in a standard pressure pot. Unlike traditional interlocking designs, our system features adjustable shelves that lock securely in place using screws and barrel nuts, eliminating the risk of slippage or misalignment. Sturdy 3D printed supports provide exceptional stability, while the integrated 3D printed handle on top makes it easy to insert, remove, and transport the rack.

Each shelf can hold up to four slot DinoBone molds (depending on size), and the adjustable design allows you to customize the height between levels for molds of varying dimensions. Say goodbye to warping issues reported with other products—our reinforced construction ensures consistent performance over time. Ideal for hobbyists, pen turners, and professional casters looking to maximize space, save time, and boost productivity.

This base system includes the essentials to get started: the base and one shelf. Expand your setup with optional additional shelves for multi-tier configurations. Perfect for use in resin casting projects, such as pen blanks, jewelry, and custom molds.

Key Features

• Secure Locking Mechanism: Shelves fasten with screws and barrel nuts for a rock-solid fit, preventing accidental unlocking or tipping.
• Adjustable Shelves: Customize shelf heights to accommodate different mold sizes, offering flexibility not found in fixed interlocking systems.
• Anti-Warp Design: 3D printed supports and high-quality materials resist warping, ensuring long-term reliability.
• Easy Handling: Built-in 3D printed top handle with finger grips for safe and convenient carrying.
• Stackable and Expandable: Start with the base + one shelf; add more shelves as needed for multiple tiers (capacity depends on pot height and mold height).
• Space-Efficient: Maximizes vertical space in your 5 gallon pressure pot without touching or disturbing curing molds.
• User-Friendly Assembly: Simple instructions included; assemble in minutes with provided hardware.

Product Specs

• Designed to fit standard 5 gallon pressure pots, including models like California Air Tools 365C or equivalent with at least 12” internal diameter and 14” internal height.
• Rack dimensions: 11.75” diameter and up to 13.25” height (adjustable based on shelf configuration).
• Material: High-quality, durable components with 3D printed supports and handle to prevent warping and ensure longevity.
• Includes: Base, one adjustable shelf, sturdy 3D printed supports, 3D printed top handle, screws, and barrel nuts for secure assembly.
• Additional shelves available for purchase to expand capacity up to 5 tiers.

Why Choose Our Mold Rack System?

Tired of flimsy racks that warp or fail under pressure? Our system addresses common complaints with competitors’ products by incorporating adjustable, lockable shelves and robust 3D printed elements. Whether you’re casting pen blanks at StadiumPenBlanks.com or tackling larger projects, this rack delivers professional-grade performance at an affordable price.

Set of 2 silicone inserts for the DINOBONE - COMBO CASTING SYSTEM.  These inserts fit chambers measuring 5.25" x .84375" x 1.0".

The large stoppers will accommodate tubes 27/64" - 13.2mm in diameter. 

Set of 2 silicone inserts for the "DINOBONE - COMBO CASTING SYSTEM".  These inserts fit chambers measuring 5.25" x .84375" x 1.0".

These blocks are designed to all for casting shorter than the full length blanks. 

Set of 2 silicone inserts for the "DINOBONE - COMBO CASTING SYSTEM".  These inserts fit chambers measuring 5.25" x .84375" x 1.0".

The small stoppers will accommodate tubes 7mm - 27/64" in diameter. 

Special Offer: 40% Off Due to Manufacturing Error

NOT FOR USE WITH LABEL TUBE CASTING

These DinoBone 1 Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are ideal for single blank casting with solid resin or hybrid resin, producing high-quality pen blanks.

To easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.

Crafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.

Mold Specifications:

- Dimensions: 7" x 2.25" x 1.60"
- Casting Chambers: Single chamber, 5.25" x 0.863" x 1.0"
- Material: Milled HDPE for durability
- Features: Stackable, reusable, easy demolding, flattened ears for identification

Usage Instructions:

Apply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.

Why Buy These Seconds?

Despite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.

Note:

These molds are NOT compatible with any tube casting plugs due to the 0.5mm oversized slots. The flattened ears on the ends identify them as SECONDS. Trim blanks on a table saw for precise squaring, if needed.

Get these high-quality molds at a 40% discount while supplies last!

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold body has overall dimensions of 13.25" x 6.50" x 1.60" with TEN casting chambers, each measuring 5.25" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold system has overall dimensions of 7.25" x 3.75" x 1.60" with two casting chambers, each measuring 5.25" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Includes four large stopper silicone inserts and four small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27/64" in diameter.  The large stoppers will accommodate tubes 27/64" - 13.2mm. 

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold body has overall dimensions of 7.25" x 3.75" x 1.60" with two casting chambers, each measuring 5.25" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Special Offer: 40% Off Due to Manufacturing Error

NOT FOR USE WITH LABEL TUBE CASTING

These DinoBone 2-Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are ideal for single blank casting with solid resin or hybrid resin, producing high-quality pen blanks.

To easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.

Crafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.

Mold Specifications:

- Dimensions: 7" x 3.75" x 1.60"
- Casting Chambers: Two chambers, each 5.25" x 0.863" x 1.0"
- Material: Milled HDPE for durability
- Features: Stackable, reusable, easy demolding, flattened ears for identification

Usage Instructions:

Apply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.

Why Buy These Seconds?

Despite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.

Note:

These molds are NOT compatible with any tube casting plugs due to the 0.5mm oversized slots. The flattened ears on the ends identify them as SECONDS. Trim blanks on a table saw for precise squaring, if needed.

Get these high-quality molds at a 40% discount while supplies last!

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold system has overall dimensions of 7.25" x 5.25" x 1.60" with three casting chambers, each measuring 5.25" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Includes six large stopper silicone inserts and six small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27/64" in diameter.  The large stoppers will accommodate tubes 27/64" - 13.2mm. 

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold body has overall dimensions of 7.25" x 5.25" x 1.60" with three casting chambers, each measuring 5.25" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Special Offer: 40% Off Due to Manufacturing Error

NOT FOR USE WITH LABEL TUBE CASTING

These DinoBone 1 Mold Body molds are offered at a 40% discount due to a manufacturing error where the casting slots were cut 0.5mm too wide, making them incompatible with our tube casting plugs. They are ideal for single blank casting with solid resin or hybrid resin, producing high-quality pen blanks.

To easily distinguish these SECONDS from properly manufactured molds, the ears on the ends have been flattened.

Crafted from durable HDPE (High-Density Polyethylene), these semi-permanent molds resist warping and cracking, outperforming traditional silicone molds. Their stackable design eliminates the need for a casting rack, streamlining your workspace. Demolding is simple—remove the suction plugs, flip the mold, and tap the ends on your workbench to release the blanks.

Mold Specifications:

- Dimensions: 7" x 5.25" x 1.60"
- Casting Chambers: Three chambers, 5.25" x 0.863" x 1.0"
- Material: Milled HDPE for durability
- Features: Stackable, reusable, easy demolding, flattened ears for identification

Usage Instructions:

Apply a release agent, such as Maneater Wax Mold Release or Maneater Silicone Mold Release, to the chambers and rubber plugs to prevent resin buildup. Ensure full coverage and let it dry before pouring resin. After curing, use a rubberized dead blow hammer to lightly tap the mold’s bottom and sides. Flip the mold and tap the ends on your workbench to release the blanks. Alumilite and polyester resin blanks release effortlessly, while epoxy blanks may require extra taps or a blast of air from a rubberized nozzle.

Why Buy These Seconds?

Despite the oversized slots, these molds are a cost-effective solution for single blank casting. Their robust construction, innovative stackable design, and discounted price make them an excellent choice for crafting stunning pen blanks.

Note:

These molds are NOT compatible with any tube casting plugs due to the 0.5mm oversized slots. The flattened ears on the ends identify them as SECONDS. Trim blanks on a table saw for precise squaring, if needed.

Get these high-quality molds at a 40% discount while supplies last!

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold system has overall dimensions of 7.25" x 6.75" x 1.60" with four casting chambers, each measuring 5.25" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Includes eight large stopper silicone inserts and eight small stopper silicone inserts!  The small stoppers will accommodate tubes 7mm - 27/64" in diameter.  The large stoppers will accommodate tubes 27/64" - 13.2mm. 

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold body has overall dimensions of 7.25" x 6.75" x 1.60" with four casting chambers, each measuring 5.25" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold body has overall dimensions of 11.25" x 7.25" x 1.60" with EIGHT casting chambers, each measuring 6" x .84375" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold system has overall dimensions of 6.25" x 4.875" x 1.60" with three casting chambers, each measuring 4.5" x .75" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Includes six small stopper silicone inserts!  The stoppers will accommodate tubes 7mm - 27/64" in diameter.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers and on the silicone inserts, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.

Introducing a brand new line of custom crafted molds that are sure to change the hand casting industry.  These are semi-permanent in nature.  They won't warp or crack but will take lots of abuse, unlike traditional silicone molds.  These tough molds are solid bodies, milled from blocks of HDPE (High Density Polyethylene).  And best of all, they stack!!  There is no need for a casting rack!  Demolding is easy!  Just pull the suction plugs, turn the mold upside down, rap the ends a few times on your work bench and watch the blanks fall out.  These true beasts are designed to DEVOUR THE COMPETITION!

This mold body has overall dimensions of 6.25" x 4.875" x 1.60" with three casting chambers, each measuring 4.5" x .75" x 1.0".  The blanks can easily be end trimmed and squared up on a table saw, if so desired.

Important Notes:

A release agent must be used due to the rigidity of the molds.  Maneater Wax Mold Release is highly recommended.  Just brush the release agent into the chambers, ensuring complete coverage.  Allow to dry before pouring your resin.  Also apply a release agent on the rubber plugs to keep them free of any resin buildup caused by potential spillage. 

A rubberized dead blow hammer will help the demold process greatly.  Lightly rap the bottom and sides of the mold once your blanks have fully cured, then turn the mold over and lightly rap the mold ends against your work bench top to see your blanks release.  Based on personal experience, Alumilite and polyester resin blanks will release with little effort at all.  Epoxy blanks may require a few extra raps or a blast of air from a rubberized nozzle before releasing.