Products

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The Long Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens, while the Short Alligator pen blank measures 3/4” x 3/4” x 2-1/2" suitable for the single tube pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger or two-tube pen kits and the smaller shorts are 3/4” x 3/4” x 2-1/2” suitable for single tube blanks like Sierra clone or Bolt Action Pen kits.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Alligator Jawbone blanks use JB Royal Original resin combined it with a real jawbone of an alligator to create this eye popping pen blank. The jawbones are meticulously shaped to fit pen blank sized slots of our Dinobone Casting molds. Using a JBR resin colored mixture poured over the jawbone and held under extreme pressure, we cast each jawbone into the works of art you see here. By using JB Royal resin verses a polyester resin, it offers a more stable platform when interacting with the stabilized alligator jaw bone.

The small Alligator pen blank measures 13/16” x 13/16” x 5" suitable for the larger pens.

Use caution when turning these blanks as the bone and resin mixture will show two densities of material when the chisel is applied. To apply a finish to these blanks, wet sand to 800 grit or higher, followed by your favorite finishing method for your desired gloss finish. CA may be needed for any pin holes that may appear in the bone material.  We recommend following your wet sanding with Stadium Pen Blanks Magic Juice Polishing Compound for a spectacular shine!  

Maneater Resin Casting Mica Powders

Transform your resin projects with Maneater Aqua GLOW Powder – the ultra-bright, mica-based glow-in-the-dark pigment that charges quickly under any light source and explodes into a vivid turquoise / aqua-blue glow that lasts for hours in complete darkness. Perfect for creating stunning mermaid-themed pen blanks, ocean-inspired river tables, glowing knife scales, custom jewelry, or any casting where you want that "wow" factor when the lights go out.

This isn't your average cheap Amazon glow powder that barely lights up – Maneater GLOW is specially formulated for casting resins, delivering an intense, even turquoise glow without the grainy look or weak performance of lower-grade strontium aluminate pigments. In daylight, it has a subtle pearlescent aqua shimmer; charge it for just 10-30 seconds under sunlight, LED, or UV blacklight, and watch it radiate a bright, ethereal turquoise that turns heads.

Why Pen Turners & Resin Artists Love Maneater Aqua GLOW Powder

• Insane Glow Intensity → One of the brightest aqua/turquoise glow pigments available for resin work. Charges fast, glows strong for 8+ hours (initial burst is brightest, then slowly fades).
• Perfect for Pen Blanks → Create "Mermaid Tail", "Deep Ocean", or "Bioluminescent" pens that look elegant in normal light and absolutely magical in the dark.
• Super Fine Mica Base → Mixes smoothly with no clumping or settling issues in slower-curing epoxies. A little goes a very long way!
• Versatile & Compatible → Works beautifully with Alumilite urethanes, JB Royal Original/Thin epoxy, most polyester resins, and other clear casting epoxies. Pairs amazingly with liquid pigments (try Divine or Eye Candy pigments for layered effects).
• Easy-to-Use 0.5 oz Wide-Mouth Jar → Precise measuring, no mess, and enough powder for dozens of pen blanks or larger projects.

Recommended Mix Ratios & Tips for Best Results

1. Use clear or very lightly tinted resin — darker bases will overpower the delicate pastel look.
2. Mix the powder into Part A first for even distribution, then add Part B.
3. Start conservative — 1 gram per 8 oz resin gives a true soft turquoise; add a little more for stronger color/glow.
4. Charge with sunlight, LED/UV lamp, or even a phone flashlight for 5–15 minutes.
5. Works beautifully in epoxy, urethane, and UV resin.

Pro Tip: For the absolute brightest glow, use in clear or lightly tinted resin and avoid overloading with opaque pigments that can block light charge. Charge finished blanks under direct sun or a strong UV flashlight for 30–60 seconds – the glow will be eye-searing!

Project Ideas That Sell Like Crazy

• Mermaid/ocean swirl pen blanks (pair with teal, purple, and silver mica)
• Glow-in-the-dark fishing lure embeds
• Night-sky river tables with glowing "waves"
• Custom glowing knife handles or bottle openers
• Halloween or fantasy-themed jewelry

Ready to make your blanks glow like never before? Add Maneater Aqua GLOW Powder to your cart today and watch your sales light up – customers can’t resist a pen that looks amazing 24/7!

Blue Glow Powder That Transforms Resin Projects

Maneater Casting GLOW Powder - Blue gives makers a rich royal blue shimmer in daylight that charges into a brilliant electric blue glow lasting 8+ hours. This 0.5 oz jar is perfect for custom resin casting supplies projects including stadium-style pens, galaxy effects, and deep-ocean river tables.

Why Makers Choose This Blue Glow Powder

The ultra-fine particles mix smoothly into Alumilite, JB Royal Original, or JB Royal Thin resin without clumping or sinking. A little goes a long way—most users need only 1 g per 8 oz of resin for powerful results. The wide-mouth jar makes scooping easy for dozens of pen blanks or multiple large pours.

Recommended Mix Ratios & Tips for Best Results

Use clear or very lightly tinted resin so the pastel glow stays vibrant. Mix the powder into Part A first, then add Part B and stir slowly to avoid bubbles. Start conservative at roughly 1 g per 8 oz resin and increase for stronger intensity. Charge under sunlight, LED/UV, or a phone flashlight for 5–15 minutes. This pigment works in both epoxy and UV resin systems.

Pro Tip: For the brightest glow, choose clear resin, keep pigment load light, and give the cast a 30–60 second UV or sunlight charge.

Project Ideas

Try this blue glow powder in custom pen blanks, cosmic galaxy pours, mermaid-themed river tables, glow tumblers, jewelry, and coasters. Pair with other Maneater Glow colors for layered effects.

Ready to make your next pour glow? Add Maneater Casting GLOW Powder - Blue to your cart today and explore the full Mica Powder and HDPE Molds collections.

Blue Sky Glow in the Dark Mica Powder for Resin – Maneater Blue Sky (0.5 oz)

Transform your resin projects with the softest, most ethereal glow in the dark mica powder in the Maneater lineup. By day it’s a delicate baby-blue pastel shimmer that looks right at home in nursery décor or subtle ocean themes. Charge it under light for just a few minutes and it comes alive with a gentle, long-lasting sky-blue glow that’s perfect for pastel pours, baby-themed keepsakes, custom pens, jewelry, and dreamy tumblers.

Why Maneater Blue Sky Glow Powder is Perfect for Pastel Lovers

• Ultra-Fine & Silky Smooth – Blends effortlessly into resin with zero clumping and no sinking or floating issues.
• Soft Daytime Baby Blue → Gentle Sky-Blue Night Glow – Unlike harsh neon glows, this one stays sweet and subtle both day and night.
• Extremely Long-Lasting Glow – Easily 30-60 minutes of visible soft glow after a quick charge (still faintly visible after 24 hours in complete darkness).
• Highly Concentrated – Just a tiny pinch (1/16–1/8 tsp per 8–12 oz of resin) gives beautiful pastel color and plenty of glow.
• 0.5 oz wide-mouth jar – Enough for dozens of pen blanks, multiple tumblers, or several large pastel projects.

Perfect For

• Baby shower gifts, nursery-themed resin art, and keepsakes
• Soft pastel galaxy and cloud pours
• Dreamy ocean, mermaid, or unicorn river tables and tumblers
• Subtle glow custom pens and pen blanks (especially stadium-style with light bases)
• Jewelry, coasters, keychains, and any project where “cute glow” beats “nuclear glow”

How to Get the Most Beautiful Soft Glow (Mixing Tips)

1. Use clear or very lightly tinted resin — darker bases will overpower the delicate pastel look.
2. Mix the powder into Part A first for even distribution, then add Part B.
3. Start conservative — 1 gram per 8 oz resin gives a true soft baby-blue; add a little more for stronger color/glow.
4. Charge with sunlight, LED/UV lamp, or even a phone flashlight for 5–15 minutes.
5. Works beautifully in epoxy, urethane, and UV resin.

Important: This is a casting pigment and is NOT designed for stabilizing resin/wood.

Frequently Asked Questions

• Is this safe for skin-contact items like jewelry? Yes — cosmetic-grade base pigments and non-toxic, but like all mica powders, not food-safe.
• How long does the glow really last? Bright soft glow for 30-60 minutes, gradually fading but still visible in total darkness after 8–12+ hours.
• Will the color bleed or fade over time? No bleeding and fully UV-stable — your projects will look great for years.
• Can I mix it with other colors? Absolutely! It layers beautifully with whites, other pastels, or even a touch of Maneater Blue for a day-to-night gradient effect.
• Is the glow bright enough to see easily? It’s a gentle, dreamy sky-blue glow (not blinding neon) — exactly what you want for baby projects and soft aesthetics.

Ready to add that perfect soft glow to your next creation? Grab yours now before they’re gone — low stock and moving fast with all the pastel resin artists! Thousands of pen turners and resin creators already swear by Maneater glow powders. Join the club and make something magically gentle.

Questions? Shoot us a message — we’re resin addicts too and love helping you nail that perfect pastel glow!

Orange-Red Glow in the Dark Mica Powder – Fiery Lava Glow (0.5 oz) – Maneater Series by Stadium Pen Blanks

Ignite your resin projects with our premium Orange-Red Glow in the Dark Mica Powder – Fiery Lava Glow, the ultimate choice for crafters seeking a breathtaking, long-lasting luminescent effect. This intense orange-red mica powder charges quickly under sunlight or UV light and erupts into a vivid, fiery lava-like glow in the dark that’s guaranteed to turn heads.

Key Features

• Vibrant Day Color: Rich, saturated orange-red shimmer that adds depth and fire to epoxy resin, polymer clay, slime, soap making, candles, and tumblers.
• Explosive Glow-in-the-Dark Performance: One of the strongest glowing pigments available – delivers an intense, long-lasting orange-red glow after charging.
• Ultra-Fine Particle Size: 10-60 micron powder disperses evenly with minimal stirring, preventing clumping and ensuring a smooth, professional finish in resin pours.
• Non-Toxic & Skin-Safe: CPSIA certified, cruelty-free, vegan, and safe for bath bombs, cosmetics, and art projects.
• Generous 0.5 oz (14g) Jar: Plenty of powder for multiple pen blanks, jewelry pieces, river tables, keychains, or custom dice.

Perfect For

• Stadium Pen Blanks “Maneater” series – create molten lava-themed pens that glow like real embers
• Resin art & jewelry with dramatic day/night contrast
• Halloween & cosplay props
• Custom knife scales, gaming dice, and automotive accents

Why Choose Maneater Fiery Lava Glow?

Unlike cheap glow powders that fade quickly or appear dull during the day, our Fiery Lava formulation combines premium strontium aluminate glow pigment with high-quality orange-red mica for a true dual-effect: stunning metallic sparkle by day and an aggressive, fiery orange-red glow at night. A little goes a long way.

Frequently Asked Questions (FAQ)

Q: How much powder do I need per ounce of resin? A: Start with 1–2 grams per 1 oz of epoxy for a strong glow and rich color. You can add up to 3–4 g for an even more intense effect.

Q: How long does the glow last? A: After a full charge (10 minutes sunlight or 2–3 minutes UV/blacklight), it glows brightly for the first 1–2 hours and remains visibly glowing for 8–12+ hours in total darkness.

Q: Will it work in clear resin or does it need a white base? A: It works beautifully in clear resin. A white or light base can make the glow slightly brighter, but it’s not required.

Q: Is this the same as phosphorescent pigment only? A: No—this is a hybrid: high-grade strontium aluminate glow pigment blended with premium orange-red mica, giving you both gorgeous daytime color and powerful glow.

Q: Can I use it in soap, candles, or slime? A: Yes! It’s non-toxic and stable in cold-process soap, melt & pour, wax, and slime (just avoid high-heat candle pouring over 180 °F/82 °C for longest glow life).

Q: Does it settle or sink in resin? A: Thanks to the ultra-fine particle size, it suspends very well with minimal stirring or thickener.

Q: How do I charge it fastest? A: Direct sunlight or a UV flashlight/blacklight for 5–10 minutes gives the strongest charge.

Light the night — add Fiery Lava Glow to your cart today and turn every project into molten art!